Dodge Sprinter 3500 Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 518

Dodge Sprinter 3500 Скачать руководство пользователя страница 68

NOTE:

When using the LATCH attaching system to

install a child restraint, please ensure that all seat belts
not being used for occupant restraints are stowed and out
of reach of children. It is recommended that before
installing the child restraint, buckle the seat belt so the
seat belt is tucked behind the child restraint and out of
reach. If the buckled seat belt interferes with the child
restraint installation, instead of tucking the seat belt
behind the child restraint, route the seat belt through the
child restraint belt path and then buckle it. This should
stow the seat belt out of the reach of an inquisitive child.
Remind all children in the vehicle that the seat belts are
not toys and should not be played with, and never leave
your child unattended in the vehicle.

NOTE:

If your child restraint seat is not LATCH com-

patible, install the restraint using the vehicle seat belt.

Installing the Child Restraint System

WARNING!

Do not install child restraint systems equipped with
LATCH attachments in the center position of a Quad
Cab model rear seat. The LATCH anchorages in this
seat are designed for the two outboard seating posi-
tions only. A child may be placed in the rear center
seating position of a Quad Cab model using the seat
belt and child tether anchorage. Failure to follow this
may result in serious or fatal injury.

68

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
66
67
68
69
70
...
»

Содержание Sprinter 3500







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов