Dodge Sprinter 3500 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 518

Dodge Sprinter 3500 Скачать руководство пользователя страница 49

Here are some simple steps you can follow to minimize
the risk of harm from a deploying airbag.

1. Children 12 years and under should always ride
buckled up in a rear seat in an appropriate child restraint.

Infants in rear-facing child restraints should NEVER ride
in the front seat of a vehicle with a passenger front airbag,
unless the airbag is turned off

(2500/3500 Standard Cab

Vehicles Only). An airbag deployment can cause severe
injury or death to infants in that position. See the
Passenger Airbag On/Off Switch section.

You should read the instructions provided with your
child restraint to make sure that you are using it properly.

2. If your vehicle does not have a rear seat, see the
Passenger Airbag On/Off Switch section.

3. Children that are not big enough to properly wear the
vehicle seat belt (see section on Child Restraints) should
be secured in the rear seat in child restraints or belt-
positioning booster seats. Older children who do not use
child restraints or belt-positioning booster seats should
ride properly buckled up in the rear seat. Never allow
children to slide the shoulder belt behind them or under
their arm.

4. All occupants should use their lap and shoulder belts
properly.

5. The driver and front passenger seats should be moved
back as far as practical to allow the airbag room to inflate.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

49

2

«
...
47
48
49
50
51
...
»

Содержание Sprinter 3500







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов