Dodge Sprinter 3500 Скачать руководство пользователя страница 270 | Manualshive

Страница: 270 / 518

Dodge Sprinter 3500 Скачать руководство пользователя страница 270

The Cummins Diesel engine is equipped with several
features designed to assist cold weather starting and
operation:

•

The engine block heater is a resistance heater installed
in the water jacket of the engine just above and behind
the oil filter. It requires a 110–115 volt AC electrical
outlet with a grounded, three-wire extension cord.

NOTE:

The engine block heater cord is a factory in-

stalled option. If your vehicle is not equipped, heater
cords are available from your authorized Mopar

t

dealer.

•

A 12–volt heater built into the fuel filter housing aids
in preventing fuel gelling. It is controlled by a built-in
thermostat.

•

A heated intake air system both improves engine
starting and reduces the amount of white smoke
generated by a warming engine.

Normal Starting Procedure — Engine Manifold Air
Temperature Above 66°F (19°C)

Observe the Instrument Panel Cluster lights when start-
ing the engine.

1. Always apply the parking brake.

2. Shift into PARK for an automatic transmission. Fully
depress and hold the clutch and shift into NEUTRAL for
a manual transmission. Models with manual transmis-
sion are equipped with a clutch interlocking cranking
system. The clutch must be fully depressed to start the
vehicle.

3. Turn the ignition key to the ON position and look at
the instrument panel cluster lamps.

270

STARTING AND OPERATING

«
...
268
269
270
271
272
...
»

Содержание Sprinter 3500







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов