Dodge Sleevoil STL 9 PLAIN, Инструкция по эксплуатации

Страница: 7 / 8

7
REPLACEMENT PARTS
ITEM DESCRIPTION QTY PART NUMBERS
9” 10” 12” 9” 10” 12”
PLAIN PLAIN PLAIN XC XC XC
STL EXPANSION PILLOW BLOCK

132766 132767 132768 132538 132539 132559
STL MODULAR HOUSING

134236 134237 134238 134244 134245 134246
SSL EXPANSION PILLOW BLOCK

132924 132925 132926 133565 133566 –
SSL MODULAR HOUSING

134240 134241 134242 134247 134248 –
8 HOUSING CAP BOLT 4 411227 411227 411229 411228 411229 411230
12 OIL DRAIN PLUG 1 430012 430012 430012 430012 430012 430019
13 OIL LEVEL PLUG 2 430014 430014 430014 430014 430014 430014
15 THERMOCOUPLE PLUG 2 430012 430012 430012 430012 430012 430012
16 THERMOCOUPLE ADAPTOR 2 430081 430081 430081 430081 430081 430081
19 GASKET ELIMINATOR - 515 VARIES 427359 427359 427359 427359 427359 427359
22 INSPECTION COVER 2 432199 432199 432199 432199 432199 432199
24 OIL GAUGE 1 430135 430135 430135 430135 430135 430135
53 THERMOSTAT / ACCESSORY PLUG 1 430012 430012 430012 430012 430012 –
54 HEATER COMBO PLUG 1 430017 430017 430017 430017 430017 –
55 CIRCULATING OIL DRAIN PLUG 2 430017 430017 430018 430018 430018 –
36 TRAPEZOIDAL OIL RING 2 135297 135297 135732 135137 135138 135299
27 PLUNGER SCREW KIT

1 435016 435016 435018 435018 435018 435019
PLUNGER SCREW KIT 1 - - - - - -
PLUNGER SCREW BUSHING 1 - - - - - -
PLUNGER SCREW WASHER 1 - - - - - -
PLUNGER SCREW LOCKNUT 1 - - - - - -
DUST SEAL KIT

1 389835 389836 389837 389835 389836 389837
31 HNBR DUST SEAL 2 - - - - - -
33 STAINLESS STEEL SEAL RETAINER VARIES - - - - - -
GASKET ELIMINATOR VARIES 427359 427359 427359 427359 427359 427359
GROMMET KIT

1 435037 435037 N/A 435038 435039 435040
39 RUBBER GROMMET 2 - - N/A - - -
42 GROMMET PLATE 2 - - N/A - - -
43 GROMMET SCREWS 10 - - N/A - - -
46 STEEL COLLAR 4 N/A N/A N/A - - -
48 LOCKNUT 8 - - N/A - - -
52 COOLANT PIPES 4 N/A N/A N/A - - -
GASKET ELIMINATOR - 515 VARIES 427359 427359 427359 427359 427359 427359
58
THRUST COLLAR

2 133959 133960 133961 133303 133304 133305
50 LINER ASSEMBLY 1 133550 133669 133392 132591 132594 132597
Optional Accessories
56
CIRCULATING OIL INLET KIT

1 430155 430155 430155 430155 430155 –
AUXILIARY SEAL KIT

2 132814 132816 132819 132814 132816 132819
HOUSING END CAP KIT
 1 132564 132565 132566 132564 132565 132566
HEATER /T-STAT COMBO 120 V

1 434727 434727 434729 434729 434279 434729
HEATER /T-STAT COMBO 240 V
 1 434728 434728 434730 434730 434730 434730
OIL SUMP THERMOMETER
1 435093 435093 435093 435093 435093 435093
RTD KIT
 2 435147 435147 435147 435147 435147 435147
SLEEVOIL ISOLATOR

2 434714 434715 434716 434714 434715 434716

Sleevoil Pillow Blocks include Modular Housings and Liner Assemblies. Modular housings include hardware, standard seals, grommets (if applicable), and oil rings.

Order two thrust collars to turn an expansion Pillow Block into a non-expansion Pillow Block (STL housings only). Thrust collars are not included and must be ordered individually.

STL Housings are longer in length than SSL Housings, and STL Housings can be used in both the expansion and non-expansion locations (if space allows). SSL Housings can
only be used in expansion locations because their shorter overall length does not allow the use of thrust collars.

These parts are assemblies that include the indented parts listed directly below them.

These parts will not fit on the 12” XC Pillow Block without modifications from the factory.

Optional bearing seals will add extra length to housings. See catalog for dimensional details.