6
PLAIN PILLOW BLOCKS
XC PILLOW BLOCKS
STL Series
(Plain and XL)
End Bell Configuration
NOTE: The two-digit numbers are for reference only. Order parts by the six-digit part numbers listed in the Parts List. Each
six-digit number is a complete identification of the part or assembly.
These Sleevoil pillow blocks and liners are identified by a six-digit part number which fully identifies the housing and / or liners. Liner
nameplates are pinned to the Sleevoil liner cap near an oil ring inspection hole. Housing nameplates are pinned to the housing foot
parallel to the shaft. Refer to these part numbers when ordering replacement parts.
NOTE: Modified units will have unique part numbers that will not be shown in the parts list.
