Dodge HORNET 2023 Скачать руководство пользователя страница 168

Страница: 168 / 288

166

SAFETY

NOTE:



The TPMS is not intended to replace normal tire care

and maintenance, or to provide warning of a tire failure

or condition.



The TPMS should not be used as a tire pressure gauge

while adjusting your tire pressure.



Driving on a significantly underinflated tire causes the

tire to overheat and can lead to tire failure. Underinfla

tion also reduces fuel efficiency and tire tread life, and

may affect the vehicle’s handling and stopping ability.



The TPMS is not a substitute for proper tire mainte

nance, and it is the driver’s responsibility to maintain

correct tire pressure using an accurate tire pressure

gauge, even if underinflation has not reached the level

to trigger illumination of the Tire Pressure Monitoring

System Warning Light.



Seasonal temperature changes will affect tire pres

sure, and the TPMS will monitor the actual tire pres

sure in the tire.

Premium System

The Tire Pressure Monitoring System (TPMS) uses wireless

technology with wheel rim mounted electronic sensors to

monitor tire pressure levels. Sensors, mounted to each

wheel as part of the valve stem, transmit tire pressure

readings to the receiver module.

NOTE:

It is particularly important for you to check the tire

pressure in all of the tires on your vehicle monthly and to

maintain the proper pressure.
The TPMS consists of the following components:



Receiver module



Four Tire Pressure Monitoring System sensors



Various Tire Pressure Monitoring System messages,

which will display in the instrument cluster display



Tire Pressure Monitoring System Warning Light

Tire Pressure Monitoring System Low

Pressure Warnings

The Tire Pressure Monitoring System Warning

Light will illuminate in the instrument cluster

and a chime will sound when tire pressure is

low in one or more of the four active road tires.

In addition, the instrument cluster will display a "Tire Low"

message, an “Inflate to XX” message, and a graphic

showing the pressure values of each tire with the low tire

pressure values highlighted or in a different color.

Tire Pressure Monitoring System Low Pressure Warning

Should this occur, you should stop as soon as possible and

inflate the tires with low pressure (those highlighted or in a

different color in the instrument cluster display graphic) to

the vehicle’s recommended cold placard pressure value, as

shown in the “Inflate to XX” message. Once the system

receives the updated tire pressures, the system will

automatically update, the pressure values in the graphic

display in the instrument cluster will stop being highlighted

or return to their original color, and the Tire Pressure

Monitoring System Warning Light will turn off.

CAUTION!



The TPMS has been optimized for the original equip

ment tires and wheels. TPMS pressures and warning

have been established for the tire size equipped on

your vehicle. Undesirable system operation or sensor

damage may result when using replacement equip

ment that is not of the same size, type, and/or style.

The TPMS sensor is not designed for use on after

market wheels and may contribute to a poor overall

system performance or sensor damage. Customers

are encouraged to use Original Equipment Manufac

turer (OEM) wheels to ensure proper TPMS feature

operation.



Using aftermarket tire sealants may cause the Tire

Pressure Monitoring System (TPMS) sensor to

become inoperable. After using an aftermarket tire

sealant it is recommended that you take your vehicle

to an authorized dealer to have your sensor function

checked.



After inspecting or adjusting the tire pressure always

reinstall the valve stem cap. This will prevent mois

ture and dirt from entering the valve stem, which

could damage the TPMS sensor.

23_GG_OM_EN_USC_t.book Page 166

Содержание HORNET 2023

































































































































































































































































































Результаты поиска

Содержание HORNET 2023

Отзывы:

Бренды по названию

Популярные бренды

Dodge HORNET 2023, Руководство пользователя

Результаты поиска

Содержание HORNET 2023

Отзывы:

Бренды по названию

Популярные бренды