Dodge HORNET 2023 Скачать руководство пользователя страница 165

Страница: 165 / 288

SAFETY

163

If a Forward Collision Warning with Mitigation event begins

at a speed below 39 mph (62 km/h), the system may

provide the maximum braking possible to mitigate the

potential forward collision. If the Forward Collision

Warning with Mitigation event stops the vehicle

completely, the system will hold the vehicle at standstill for

two seconds and then release the brakes.

FCW Message

When the system determines a collision with the vehicle in

front of you is no longer probable, the warning message

will be deactivated

page 275.

NOTE:



The minimum speed for FCW activation is 3mph

(5 km/h).



The FCW alerts may be triggered on objects other than

vehicles such as guardrails or sign posts based on the

course prediction. This is expected and is a part of

normal FCW activation and functionality.



It is unsafe to test the FCW system. To prevent such

misuse of the system, after four Active Braking events

within a key cycle, the Active Braking portion of FCW will

be deactivated until the next key cycle.



The FCW system is intended for on-road use only. If the

vehicle is taken off-road, the FCW system should be

deactivated to prevent unnecessary warnings to the

surroundings.



The FCW system can become temporarily inoperative

due to heavy rain, sun rays, snow, ice, mud, or other

road contaminations accumulate on the front fascia/

bumper where the camera is located. If blockage is

detected, a “FCW Unavailability Due To Camera Blind

ness” message will display in the cluster and FCW will

not function as intended. If a second occurance

happens within the same key cycle, a FCW telltail light

will illuminate only. This is normal operation. The

system will automatically recover and resume function

when the condition clears.

FCW Settings

The Forward Collision menu setting is located in the

Uconnect Settings

page 130.

NOTE:

The default status of FCW is “Full On,” this allows the

system to provide warning and autonomous braking in the

event of a potential frontal collision.
Changing the FCW status to “Only Warning” prevents the

system from providing autonomous braking, or additional

brake support if the driver is not braking adequately in the

event of a potential frontal collision.
Changing the FCW status to “Off” deactivates the system,

so no warning or autonomous braking will be available in

case of a possible collision.

NOTE:

The FCW system state is kept in memory from one ignition

cycle to the next. If the system is turned off, it will remain

off when the vehicle is restarted.

Changing FCW Sensitivity And Operating

Status

The FCW Sensitivity and Active Braking status are

programmable through the Uconnect system

page 130.

The default sensitivity of FCW is the “Medium” setting and

the system status is “Warning & Braking”. This allows the

system to warn the driver of a possible collision with the

vehicle in front using audible/visual warnings and it

applies autonomous braking.

WARNING!

Forward Collision Warning (FCW) is not intended to

avoid a collision on its own, nor can FCW detect every

type of potential collision. The driver has the

responsibility to avoid a collision by controlling the

vehicle via braking and steering. Failure to follow this

warning could lead to serious injury or death.

23_GG_OM_EN_USC_t.book Page 163

Содержание HORNET 2023

































































































































































































































































































Результаты поиска

Содержание HORNET 2023

Отзывы:

Бренды по названию

Популярные бренды

Dodge HORNET 2023, Руководство пользователя

Результаты поиска

Содержание HORNET 2023

Отзывы:

Бренды по названию

Популярные бренды