Dodge 2015 Journey Скачать руководство пользователя страница 442

Страница: 442 / 648

ESC Operating Modes

The ESC system has two available operating modes.

Full On

This is the normal operating mode for ESC. Whenever

the vehicle is started the system will be in this mode. This

mode should be used for most driving situations. ESC

should only be turned to “Partial Off” for specific reasons

as noted. Refer to “Partial Off” for additional informa-

tion.

Partial Off

The “ESC OFF” button is located in the switch bank

above the climate control. To enter the “Partial Off”

mode, momentarily press the “ESC OFF” button and the

“ESC OFF” Indicator Light will illuminate. To turn the

ESC on again, momentarily press the “ESC OFF” button

and the “ESC OFF” Indicator Light will turn off. This will

restore the normal “ESC On” mode of operation.

NOTE:

To improve the vehicle’s traction when driving

with snow chains, or when starting off in deep snow,

sand, or gravel, it may be desirable to switch to the

“Partial Off” mode by momentarily pressing the “ESC

OFF” button. Once the situation requiring “Partial Off”

mode is overcome, turn ESC back on by momentarily

ESC OFF Button

440 STARTING AND OPERATING

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды