Dodge 2015 Journey Скачать руководство пользователя страница 101

Страница: 101 / 648

the tether strap to the anchorage and tighten the tether

strap. See the section “Installing Child Restraints

Using the Top Tether Anchorage” for directions to

attach a tether anchor.

9. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the seat belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

Any seat belt system will loosen with time, so check the

seat belt occasionally, and pull it tight if necessary.

Installing A Child Restraint With A Cinching
Latch Plate (CINCH) — If Equipped

1. Place the child seat in the center of the seating

position. For some second row seats, you may need to

recline the seat and / or raise the head restraint to get

a better fit. If the rear seat can be moved forward and

rearward in the vehicle, you may wish to move it to its

rear-most position to make room for the child seat.

You may also move the front seat forward to allow

more room for the child seat.

2. Next, pull enough of the seat belt webbing from the

retractor to pass it through the belt path of the child

restraint. Do not twist the belt webbing in the belt

path.

3. Slide the latch plate into the buckle until you hear a

“click.”

4. Finally, pull up on any excess webbing to tighten the

lap portion around the child restraint while you push

the child restraint rearward and downward into the

vehicle seat.

5. If the child restraint has a top tether strap and the

seating position has a top tether anchorage, connect

the tether strap to the anchorage and tighten the tether

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99

Содержание 2015 Journey









































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды

Dodge 2015 Journey, Руководство пользователя

Результаты поиска

Содержание 2015 Journey

Отзывы:

Похожие инструкции для 2015 Journey

Бренды по названию

Популярные бренды