Dodge 2014 dodge challenger Скачать руководство пользователя страница 422

Страница: 422 / 548

If the tire pressure is 19 psi (1.3 Bar) or higher:

1. Press the Power Button (4) to turn on TIREFIT and

inflate the tire to the pressure indicated on the tire and
loading information label on the driver-side door
opening.

NOTE:

If the tire becomes over-inflated, press the Defla-

tion Button to reduce the tire pressure to the recom-
mended inflation pressure before continuing.

2. Disconnect the TIREFIT kit from the valve stem,

reinstall the cap on the valve stem and unplug from 12
Volt outlet.

3. Place the TIREFIT kit in its proper storage area in the

vehicle.

4. Have the tire inspected and repaired or replaced at the

earliest opportunity at an authorized dealer or tire
service center.

5. Replace the Sealant Bottle (1) and Sealant Hose (6)

assembly at your authorized dealer as soon as pos-
sible. Refer to “(F) Sealant Bottle and Hose Replace-
ment.”

NOTE:

When having the tire serviced, advise the autho-

rized dealer or service center that the tire has been sealed
using the TIREFIT service kit.

(F) Sealant Bottle And Hose Replacement:

1. Uncoil the Sealant Hose (6) (clear in color).

2. Locate the round Sealant Bottle release button in the

recessed area under the sealant bottle.

3. Press the Sealant Bottle release button. The Sealant

Bottle (1) will pop up. Remove the bottle and dispose
of it accordingly.

420

WHAT TO DO IN EMERGENCIES

Содержание 2014 dodge challenger





































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2014 dodge challenger

Отзывы:

Похожие инструкции для 2014 dodge challenger

Бренды по названию

Популярные бренды

Dodge 2014 dodge challenger, Руководство пользователя

Результаты поиска

Содержание 2014 dodge challenger

Отзывы:

Похожие инструкции для 2014 dodge challenger

Бренды по названию

Популярные бренды