Dodge 2014 dodge challenger Скачать руководство пользователя страница 428

Страница: 428 / 548

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever into PARK (automatic transmis-

sion) or 1st gear (manual transmission).

5. Turn OFF the ignition.

Block the front and rear of the wheel diagonally

opposite of the jacking position. For
example, if changing the right front
tire, block the left rear wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Jacking And Changing A Tire

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:

•

Always park on a firm, level surface as far from the
edge of the roadway as possible before raising the
vehicle.

•

Turn on the Hazard Warning flasher.

•

Block the wheel diagonally opposite the wheel to
be raised.

•

Set the parking brake firmly and set an automatic
transmission in PARK; a manual transmission in
REVERSE.

•

Never start or run the engine with the vehicle on a
jack.

(Continued)

426

WHAT TO DO IN EMERGENCIES

Содержание 2014 dodge challenger





































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2014 dodge challenger

Отзывы:

Похожие инструкции для 2014 dodge challenger

Бренды по названию

Популярные бренды

Dodge 2014 dodge challenger, Руководство пользователя

Результаты поиска

Содержание 2014 dodge challenger

Отзывы:

Похожие инструкции для 2014 dodge challenger

Бренды по названию

Популярные бренды