DOD LS360W, Руководство пользователя

Страница: 12 / 25

11
Installing Your Camera
2. Attach suction or tape mount to your camera.
Both mounts are secure. The suction mount is reusable. The tape mount is smaller and reduces
vibrations but is harder to remove.
3. Install the Mount
Find a location which does not obstruct your view when driving. DOD Tech recommends placing
the camera behind the rear view mirror. Be sure to peel the protective cover from the mount
before installing.
4. Adjust the Angle
The mount has an easy to adjust ball joint which can be loosened using the plastic locking nut.
Angle your camera slightly below the horizon line to minimize glare.
5. Install the Cigarette Adapter
If you have not done so
previously
plug the cigarette adapter into your vehicle's power port. Insert the
USB plug (opposite end of the power) into the USB port on the camera. The wiring can be hidden in the
headliner and the carious seams and rubber strips around the perimeter of the windshield.
6. Remove the Protective Lens Cover
7. Install the GPS Module (Optional)
If you have purchased the optional GPS module (DG50A), insert the connector into the camera.
Your camera is now installed and ready for daily use.
Tips:
Do not turn on motion detection unless your vehicle is parked. If motion detection is enabled
while driving, the camera may not continuously record.
It is recommended to keep the G-Sensor set to low.