Docomo SH-02B, Инструкция по эксплуатации

Страница: 140 / 149

33
Manual for PC Connection_PR30.fm
*1 Stored in FOMA terminal’s memory using AT&W
commands.
*2 Not stored in FOMA terminal’s memory using AT&W
commands. Not reset with AT&F or ATZ commands.
*3 Perform Redial with ATDN
o
or ATDL
o
.
*4 If the ATZ command is executed before the AT&W
command is used, terminal settings return to last
written memory, and prior changes are erased.
*5 Settings written into the FOMA terminal’s memory
using the AT&W command is stored as non-volatile
data when power is turned off.
ATS10=<n> Sets the delay time (seconds) for
automatic disconnection
(1/10 seconds).
*1
Sets a register, but has no other effect.
n: 1 to 255 (default setting: n=1) ATS10=1
o
OK
ATS30=<n> Disconnects when no data is sent/
received for at least this amount of
time. Only valid during 64K data communication. <n>
is set in minutes.
n: 0 to 255 (default setting: n=0)
n=0 sets inactive timer off. ATS30=3
o
OK
ATS103=<n> Sets delimiter used when adding
an incoming sub-address to
number dialed. Only valid during 64K data communication.
n=0:
*
Asterisk
n=1: /Slash (default setting)
n=2: ¥Yen mark or backslash
ATS103=0
o
OK
ATS104=<n> Sets delimiter used when adding
an outgoing sub-address to
number dialed. Only valid during 64K data communication.
n=0: #Pound sign
n=1: %Percent symbol (default setting)
n=2: &Ampersand ATS104=0
o
OK
AT¥S Displays current command and
S register settings.
*2
―
AT¥S
o
E1 Q0 V1 X4
&C1 &D2 &S0
&E1 ¥V0
S000=000
S002=043
S003=013
S004=010
S005=008
S006=005
S007=060
S008=003
S010=001
S030=000
S103=001
S104=001
OK
AT¥V<n> Selects response code type used
during connection.
*1
Only valid when the ATX<n> command
(
n P. 32) setting is not n=0.
n=0: Does not use extended result codes
(default setting)
n=1: Uses extended result codes
AT¥V1
o
OK
AT command Overview Parameter/Explanation
Execution
example
[M]
[M]
[M]
[M]
[M]
[M]
Manual for PC Connection_PR30.fm 33 ページ ２００９年１０月３０日 金曜日 午後３時２６分