Docomo SH-02B, Инструкция по эксплуатации

Страница: 111 / 149

4
Manual for PC Connection_PR30.fm
To connect the FOMA terminal to your PC via FOMA
USB Cable with Charge Function 02 for a data
communication, installation of the FOMA
communication configuration file from the
accompanying CD-ROM is required (
n
P. 4 to P. 8).
Make data communication by connecting the
FOMA terminal wirelessly to a Bluetooth
compatible PC.
For details on Bluetooth connection
n
P. 9
Install DOCOMO Connection Manager from the
accompanying CD-ROM to a PC and make a
variety of necessary settings to perform a packet
transmission and 64K data communication
connecting the FOMA terminal to the PC
(
n
P. 10).
Connect the FOMA terminal to your PC with both
devices turned on. If the FOMA communication
configuration file is already installed, [
]
appears on the FOMA terminal screen. If the
FOMA communication configuration file is not
installed, install the file before connecting the
FOMA terminal to the PC (
n
P. 4).
Refer to P. 9 for details on connecting the FOMA terminal
wirelessly to your PC using Bluetooth function.
1
Insert the FOMA side of the FOMA
USB Cable with Charge Function 02
(sold separately) into the external
connector terminal on the FOMA
terminal (
S
).
2
Insert the PC side of the FOMA USB
Cable with Charge Function 02 into
the PC USB connector (
T
).
How to remove
1
Hold the release button on the FOMA terminal side of
the FOMA USB Cable with Charge Function 02 (
S
),
and pull out from the FOMA terminal (
T
). Pull by force
may cause a malfunction.
2
Pull the FOMA USB Cable with Charge Function 02
out from the PC.
To make data communication by connecting
the FOMA terminal to a PC via FOMA USB
Cable with Charge Function 02 (sold
separately), the FOMA communication
configuration file is required.
End all resident software before the FOMA
communication configuration file (Driver) is installed.
For Bluetooth connection, installing the FOMA
communication configuration file is not required.
Install on the PC using a user with administrator rights.
Perform steps 1 to 4 first, and then connect the FOMA
terminal to the PC.
FOMA communication configuration
file
If installation fails and [FOMA SH02B] is not listed in
the screens of step 3 of “Confirming installed FOMA
communication configuration file (Driver)” on P. 7,
uninstall the FOMA communication configuration file
(
n
P. 8) and install it again.
If, for some reason, the PC is unable to recognize the
FOMA terminal, uninstall the FOMA communication
configuration file (
n
P. 8) and install it again.
Preparing Bluetooth connection
DOCOMO Connection Manager
Connecting up PC to the
FOMA terminal
Connecting using FOMA USB Cable
with Charge Function 02
S
T
Keep side with
the characters up Open external
connector
terminal cover
FOMA USB Cable
with Charge
Function 02 (sold
separately)
Set USB mode setting of the FOMA terminal handset
to [Communication mode] and connect.
Connecting the FOMA terminal while charging in the
desktop holder is also possible.
Do not remove the FOMA USB Cable with Charge
Function 02 during data transmission. Otherwise,
transmission disconnection or data loss may occur.
Installing FOMA communication
configuration file
Installing FOMA communication
configuration file (Driver)
automatically
Release button
S
T
S
Manual for PC Connection_PR30.fm 4 ページ ２００９年１０月３０日 金曜日 午後３時２６分