80
Othe
rs
●
FOMA terminal etc. become hot while operating/
charging.
While operating or charging, or if you use i-
α
ppli,
videophone call, 1Seg watching, etc. for a long time
while charging the battery, FOMA terminal, battery
pack and adapter may become hot. There is no
problem about safety and continue to use it.
●
The clock is not on time.
The clock time may become wrong while turning on
the power for a long time. Set Auto time adjust of
Date and time setting to "ON" and turn the power off
and on in a place with strong radio wave conditions.
✜
Calls
●
Calls are not connected (Even when moving, "
圏外
(out of service area)" does not disappear or
although radio waves are enough, making/
receiving calls is unavailable).
･
Turn the power off and on, or remove and attach
the battery pack or the UIM.
･
Even when the signal meter on your FOMA
terminal indicates there are strong radio waves,
due to the type of radio waves, making/receiving
calls may be unavailable. Move to call again.
･
Is Call rejection setting or 3G/GSM setting set?
･
Due to the crossing of radio waves, at the crowded
public places, calls/mails are crossed and the
connection status may not be good. In this case,
"Please wait for a while" appears and the caller
hears a busy tone. Move to other place or call
again at other time.
●
Calls cannot be made using the keypads.
Have you activated All lock, Omakase Lock, Self
mode, Keypad dial lock, Display off lock setting or
Call/Mail of Function lock under Kid-safe mode?
✜
Osaifu-Keitai
●
Osaifu-Keitai function is unavailable.
･
When removing the battery pack, IC card functions
are unavailable regardless of the IC card lock
settings.
･
Have you activated Omakase Lock or IC card lock?
･
Do you place
mark of FOMA terminal over IC
card reader?
