Docomo P-06C, Инструкция по эксплуатации

Страница: 86 / 162

84
Mor
e Conv
enient
Sending Data
⿠ For infrared communications, set the receiving end terminal
first, and then start sending data within 30 seconds.
1
Submenu of the data to be sent
▶
Select “Send Ir data” or “iC
transmission”.
⿠ Procedure for sending data might differ depending on the
data.
2
Select “YES”.
Receiving Data by Infrared Communication
1
m
▶
Tool
▶
Receive Ir data
▶
Receive
2
Select “YES”.
Receiving Data by iC Communication
1
Face the
f
mark of the receiving end
terminal which shows the Stand-by
display, to the
f
mark of the sending
end terminal.
2
Select “YES”.
Connecting to a PC
You can connect the FOMA terminal to a personal computer
to exchange WMA files, images or other files stored on
microSD card.
You can also access the Internet to perform data
communication.
※
You need the FOMA USB Cable with Charge Function 02
(option) or FOMA USB Cable (option).
※
To perform data communication, you need to install the
“FOMA communication configuration file” (driver).
For details, refer to “Manual for PC Connection”.
You can download the “FOMA communication configuration
file” and “Manual for PC Connection” from the DOCOMO
website.
(
http://www.nttdocomo.co.jp/english/support/ )
DOCOMO Connection Manager
“DOCOMO Connection Manager” is a software which comes
in handy for DOCOMO’s data communication.
It enables easy PC settings according with the terms and
conditions of the user’s agreement.
It also makes it possible to check the amount of the data
communication and provides a rough estimate of the charges
using the charge counter function.
For details, refer to the DOCOMO website.
(
http://www.nttdocomo.co.jp/support/utilization/application/
service/connection_manager/
) (In Japanese only)