21
For packet communication, you can specify whether to notify your caller ID (caller ID notified/not notified).
The caller ID is your important information; so, take a great care to notify your caller ID. You can use AT
commands (
¢
DGPIR command) to specify “caller ID notified/not notified” before dial-up connection.
1
Start the communication software such as “Hyper Terminal”.
≥
See page 18 for details on how to operate “Hyper Terminal”.
2
Use the
¢
DGPIR command (see
page 35) to specify “caller ID
notified/not notified”.
≥
To automatically add “184 (not notify)” for outgoing or
incoming call, enter the following:
AT
¢
DGPIR=1
≥
To automatically add “186 (notify)” for outgoing or incoming call, enter the following:
AT
¢
DGPIR=2
3
Confirm that “OK” appears on the
display.
Set Caller ID Notified/Not Notified
Information
≥
When using DOCOMO Internet access service “mopera U” or “mopera”, you need to set your caller ID to be “notified”.
≥
If the entered AT command is not displayed, enter “ATE1
”.
■
Specifying “caller ID notified/not notified” in dial-up network
Also by dial-up network setting (see page 22), you can add “186 (notify)” or “184 (not notify)” to each access point number.
When you specify “186 (notify)” or “184 (not notify)” using both the
¢
DGPIR command and dial-up network setting, the caller ID is set as
follows:
≥
To connect to “mopera U” or “mopera”, you need to notify your caller ID.
Dial-up network
setting (cid = 3)
Caller ID notification setting by
¢
DGPIR command
Notify/Not notify caller ID
¢
99
¢¢¢
3#
Not set
Notify
Not notify
Not notify
Notify
Notify
184
¢
99
¢¢¢
3#
Not set
Not notify
(“184” specified in the dial-up network has a priority)
Not notify
Notify
186
¢
99
¢¢¢
3#
Not set
Notify
(“186” specified in the dial-up network has a priority)
Not notify
Notify
Содержание P-06C
Страница 1: ...P 06C INSTRUCTION MANUAL 11 7...
Страница 158: ...Kuten Code List...