16
Intr
oduction
■
Note the following points when you store a battery pack:
Storage in a fully charged state (the state immediately after
charging is completed)
Storage with no battery power left (the state you cannot turn
on the power of the handset due to battery drain)
These may lower the battery pack’s performance and shorten its
operating life.
Before storing a battery, check its remaining battery level: it is
recommendable, as a general rule, for the battery icon to show
two bars or for its remaining battery level to be about 40%.
Notes on handling adapters
■
Charge the battery in a place with an appropriate ambient
temperature of 5
°
C to 35
°
C.
■
Charge the battery where:
There is very little humidity, vibration, and dust.
There are no land-line phones, television sets or radios nearby.
■
While you are charging, the adapter may become warm. This is
not a malfunction, so you can keep on using.
■
Do not use the DC adapter for charging the battery when the
car engine is not running.
The car battery could go flat.
■
When using the power outlet having the disengaging prevention
mechanism, observe the instructions given in that instruction
manual.
■
Do not give a strong shock. Also, do not deform the charging
terminal.
Malfunction may result.
Notes on handling the UIM
■
Do not apply more force than is necessary when installing or
removing the UIM.
■
The warranty does not cover damage caused by inserting the
UIM into some other types of IC card reader/writer.
■
Always keep the IC portion clean.
■
Use a dry soft cloth such as the one for cleaning glasses to
clean the equipment.
■
It is recommended that you make separate notes of the
information stored on the UIM and keep such notes in a safe
place.
We take no responsibility for any loss of the stored data items.
■
For the environmental protection, bring any unneeded UIMs to
a handling counter such as a docomo Shop.
■
Do not damage, carelessly touch, or short-circuit the IC.
Data might be lost or malfunction may result.
■
Do not drop the UIM or subject it to strong impacts.
Malfunction may result.
■
Do not bend the UIM or place something heavy on it.
Malfunction may result.
■
Into the FOMA terminal, do not insert the UIM with a label or
sticker pasted.
Malfunction may result.
Notes on using Bluetooth function
■
The FOMA terminal supports the security function that
meets the Bluetooth Specification, to secure Bluetooth
communication. However, the security may not be sufficient
depending on the settings. Take care of the security for
communication when using the Bluetooth function.
■
Note that even if any leak of data or information occurs while
making connection using the Bluetooth function, we take no
responsibility.
■
With the FOMA terminal, you can use the following: Headset,
Hands-Free, Audio, Dial-up Communication, Object Push, and
Serial Port. With Audio, you might be able to use Audio Video
Remote Control. (Only with the compatible Bluetooth devices)
Содержание P-05C
Страница 1: ...P 05C INSTRUCTION MANUAL 11 7...
Страница 172: ...Kuten Code List...