Intr
oduction
14
General notes
Do not wet the equipment.
The FOMA terminal, battery, adapter/charger, and
UIM are not waterproofed. Do not use them in
environments, which are high in humidity such as in
bathrooms, and do not allow them to get wet from
rain. Furthermore, if carrying them against your
body, they become moist due to perspiration and
the internal parts may become corroded, causing
malfunction. If the parts are found to have been
damaged due to exposure to the liquids, any repairs
will not be covered by warranty, or repairs may not
be possible. This may be repaired at a cost if repairs
are possible.
■
Use a dry soft cloth such as the one for cleaning
glasses to clean the equipment.
・
The screen of the FOMA terminal sometimes has a
special coating so that they are easier to see. If you
rub it roughly with a dry cloth, it might be scratched.
Take care of the way of handling, and use only a
dry, soft cloth such as the one for cleaning glasses.
If the screen is left with water drop or stain adhered,
smear may be generated or the coating might peel
off.
・
Do not use alcohol, thinner, benzene, detergent or
other solvents for cleaning, otherwise the printing
may be removed or discoloration may result.
■
Occasionally clean the terminals of the
equipment using a dry cotton swab.
If the terminals become soiled, the connection might
deteriorate so that the power turns off or the battery
does not charge fully. Wipe the terminals with a dry
cloth or cotton swab.
■
Do not place the FOMA terminal near an air
conditioner outlets.
Condensation may form due to rapid changes in
temperature, and this may corrode internal parts and
cause malfunction.
■
Do not apply excessive force onto the FOMA
terminal and battery pack.
If you put the FOMA terminal in a bag along with
many other articles or sit with the FOMA terminal in
a clothes pocket, the display, internal circuitry and
the battery pack could be damaged or malfunction.
Also, if an external device is left connected to
the connector terminal, the connector could be
damaged, or malfunction.
■
Carefully read each instruction manual attached
to the FOMA terminal, adapter/ charger, or
desktop holder.
■
Do not rub or scratch the display part with
metals.
Doing so might cause damage to the part, resulting
in trouble or malfunction.
■
Notes on handling the FOMA terminal
Avoid using in extremely high or low
temperatures.
The FOMA terminal should be used within a
temperature range of 5°C to 35°C and a humidity
range of 45% to 85%.
■
The FOMA terminal, if operated near land-line
phones, television sets, radios or other devices
that are in use, may affect them. You should
operate your FOMA terminal as far away from
such equipment as possible.
■
It is recommended that you make separate notes
of the information stored in the FOMA terminal
and keep such notes in a safe place.
We take no responsibility for any loss of the stored
data items.
■
Do not drop the FOMA terminal or subject it to
strong impacts.
Malfunction or damage may result.
■
Do not insert an external device to the connector
terminal (earphone-microphone terminal) at a
slant when connecting, and do not pull it out
when it is inserted.
Malfunction or damage may result.
■
Make sure that nothing, such as a strap, gets
caught between the parts of the FOMA terminal
when you close it.
Otherwise, malfunction or damage may result.
■
The FOMA terminal becomes warm during use or
charging but this is not an abnormality. Use the
FOMA terminal as it is.
■
Do not leave the camera in places exposed to
direct sunlight.
Pixels may be discolored or burns may result.
■
Usually, put the cover of the connector terminal
and microSD card slot to use the FOMA terminal.
Dust or water might enter into the FOMA terminal,
causing malfunction.
■
Do not use the FOMA terminal with the back
cover left removed.
The battery pack might come out, or malfunction or
damage may result.
■
Handling Precautions
