Docomo BANC-50, Инструкция по эксплуатации

Страница: 53 / 90

Handset Settings
51
■ PIN code
A docomo nano UIM card has a security code called PIN code. This
security code is set to [0000] by default but you can change the code
(
n
P.51 "Set up SIM card lock").
The PIN code is a four- to eight-digit security code that needs to be
entered for recognizing the user of the handset every time a docomo
nano UIM card is inserted or when a device is turned on to prevent
unauthorized use of the docomo nano UIM card by a third party.
Making/Receiving a call and the device operation are enabled by
entering PIN code.
z Use the previously set PIN code when inserting a docomo nano
UIM card that has been used in another device. It is [0000] if the
setting has not been changed.
z If you enter wrong PIN codes three times continuously, it is locked
and the docomo nano UIM card becomes unavailable. In this
case, unlock with "PUK" (PIN Unlock Key).
■ PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to disable the
PIN code lock. You cannot change the code.
z If you enter wrong codes 10 times continuously, the docomo nano
UIM card is completely locked. In this case, contact a docomo
Shop.
Security key setting
1
In the standby screen,
z /
[Settings]
/
[Lock/
security]
/
[Security key setting]
2
Enter the passcode
z
When an information screen is displayed, select [OK].
3
Select an item
■
Passcode : Set four- to sixteen-digit number.
■
Password : Set four to sixteen alphanumerics or half-width
symbols
*
including at least one alphabet.
* Some half-width symbols are not available.
Set up SIM card lock
You can make settings for the PIN code.
1
In the standby screen,
z /
[Settings]
/
[Lock/
security]
/
[Set up SIM card lock]
2
Select an item
■
Lock SIM card : Set whether to enter the PIN code when the
power is turned on.
■ Change SIM PIN : Change the PIN code.
Disabling PIN lock
1
In the PIN locking screen, enter PUK (PIN Unlock
Key)
2
Enter a new PIN code
3
Enter the new PIN code again
You can make settings for the energy saving, or check the
battery level.
1
In the standby screen,
z /
[Settings]
/
[Energy
saving/battery]
2
Select an item
■
Energy saving settings : For details
n
P.51 "Energy saving
settings"
■ Battery : Visually check changes in the remaining battery
level, battery consumption level, etc.
Energy saving settings
You can make settings for the energy saving mode. You can
also set to switch to the energy saving mode according to the
battery level and the time.
1
In the standby screen,
z /
[Settings]
/
[Energy
saving/battery]
/
[Energy saving settings]
2
Select an item
■ Energy saving : Set whether to use the energy saving mode.
■ Switch by batt. : Set the battery level to switch to the energy
saving mode at.
■
Switch by time : Set whether to switch to the energy saving
mode when specified time arrives.
z To change switch time: Point the cursor at the time to
switch
/ C /
[Switching time]
/
set a time
/ C
z To switch to Energy saving: Point the cursor at the switch
time
/ C /
[Switch energy saving]
/
[ON]/[OFF]
■
Advanced settings for Energy saving
Set functions to the energy saving individually.
1
In the standby screen,
z /
[Settings]
/
[Energy
saving/battery]
/
[Energy saving settings]
/ C
2
Set each item
z To reset the advanced settings:
C /
[OK]
You can make settings for Airplane mode, VPN, or other
network.
1
In the standby screen,
z /
[Settings]
/
[Communication/network]
2
Select an item
■
Airplane mode : Restrict the use of some functions using
communication such as call/mail function.
■ Data usage : For details
n
P.52 "Data usage"
■
Network settings : Make the following settings.
z VPN settings : For details
n
P.52 "VPN (Virtual Private
Network)"
z Mobile networks : For details
n
P.52 "Mobile networks"
z In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not inserted,
while the PIN code is locked or from the PUK (PIN Unlock Key)
entry screen.
z The setting is saved on the docomo nano UIM card.
Energy saving/battery
When Energy saving is [ON] by Switch by batt.
z
Energy saving does not change to [OFF] even when the time set
for [Switch time] arrives.
z Energy saving changes to [OFF] when the battery level exceeds
the battery level set for [Switch by batt.] to switch.
z Energy saving is not disabled even if [Switch by batt.] is [OFF].
Communication/network