Beach King Mount installation - continues
Adjust the two mounts per the dimensions below, then tighten to secure
Installation Procedure for Your - Series 100 Docksider
Kayak Storage Rack to Water Level Adjustment
:
Now that the Mounts are in place; Mount the Cradle Assembly to them.
If the distance to the water from the dock decking is:
10 to 22 inches: insert clevis pin in the 2nd hole of the pivot lateral into the top Slot of the mounting
bracket.
17 to 29 inches: insert clevis pin in the 2nd hole of the pivot lateral into the bottom Slot of the mounting
bracket
20 to 31 inches: insert clevis pin in the 4th hole of the pivot lateral into the top Slot of the mounting bracket
25 to 37 inches: insert clevis pin in 4th hole of the pivot lateral into the bottom Slot of the mounting
bracket
Adjust if required - up or down - based on your specific watercraft or if your water level changes
significantly throughout the season.
Water Level adjustment – continued
To
“Lock” the Brackets and Pivot Laterals together
insert “Locking Pin” on both sides of unit.
If Clevis Pin with Circular Retaining Ring in Hole 2 or 4 of Pivot Lateral is seated in the Top Slot.
When mounted, the distance between mounts should be,
- Dockside Unit - 32 inches apart (center to center)
- Waterside Unit - 26 ½ inches apart (center to center)
On Center
Insert 2
nd
Clevis Pin through hole in bracket
and secure with
“R” Retaining Clip on opposite side.
Page 7 of 11
