background image

Operating Instructions 

- continued

 

 

6 -  Float your kayak completely out of the rack and 

6 -  Rotate one of the Latch Plates back into 

then pull on the tether cord, to lift the cradle back 

 

position such that the cradle will not 

into the storage position. 

 

Rotate back toward the water.  

7 -  Rotate one of the Latch Plates back into its holding 

 

7 -  Enter your kayak ensuring you are clear of  

position such that the cradle will not rotate back  

 

the rack, grab your paddle and start your 

into the water when released. 

 

Voyage 

 Enter your Kayak ensuring you are clear of the rack, 

        Grab your paddle and start your voyage. 

 

To Load and Store: 

 

 

Dockside Operating Models 

 

Waterside Operating Models

 

1 -  Exit your kayak assuring you are clear of 

1 -  Exit your kayak assuring you are clear of the 

kayak rack. 

 

the kayak rack.

 

 Release the Latch Plates and lower the cradle. 

2 -  Release the Latch Plates and lower the  

 

        cradle.

 

 Secure tether strap to the Pivot Lateral such that your 

3 -  Position the cradle such that your kayak kayak will 

float into your rack between the handle 

        will float into your rack between the  

and the lifting webbing. 

 

handle and the lifting webbing 

4 -  Float your kayak into the rack and position  

4 -  Float your kayak into the rack and position          

 

5 -  Grasp the tether strap and slowly lift / rotate your 

5 -  Grasp the center of the handle and slowly kayak 

and rack into its storage position. 

        lift / rotate your kayak into its storage 

 

        position.

 

6 -   Grasp the handle of your rack, holding it in its  

6 -  Rotate the Latch Plates into position such storage 

position. 

        that your kayak does not accidently  

 

 

rotate back into the water.

 

7 -  Rotate the Latch Plates into position such that your  

7 -  Store your paddle between 

 

        kayak will not rotate back into the water. 

        the webbing under the cam buckle.

 

8 - Release your hand from the cradle handle and  

secure the tether cord to a pivot lateral or the  
handle with a simple overhand knot. 

 

9 -  If you choose, store your paddle between the 

webbing under the cam buckle. 

You’re DONE 

- just Load / Latch / and walk away!

 

 

 

 

 

 

 

WE SINCERLY HOPE YOU ENJOY THE CONVENIENCE OF 

 

 

 
 

 

Page 12 of 12 

 

 

“The DockSider”

TM

 

For assistance, please call:  585 

 734 

 7374

 

Or send email to:  

[email protected]

 

DockCraft Industries LLC

 

3694 Nibawauka Beach

 

Canandaigua, New York  14424

 

www.DockCraft.com

 

Содержание DockSider













Отзывы: