Assembly Instruction
Attach Cradle Handle :
1 - Position Handle over Cradle.
2 - Slide the Handle over extension on Cradle.
3 - Depress Snap Button on Cradle.
4 - Seat Handle until Snap Button pops through the Handle hole.
5 - Repeat process for the other Cradle.
Steps 1
–
4
Dockside Rack Waterside Rack
Notes -
Lifting Straps are on the inside
Dockside Rack
–
Short Legs on the outside
Waterside Rack
–
Shorter Legs on the inside
Insert Clevis Pins to set height of rack from water
If the Water Level is 10 to 25 inches below your Dock Decking -
6 - Insert Clevis Pin through Hole #2 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle,
attach retaining ring through the hole in the end of the clevis pin.
7
–
If the Water Level is 25 inches or greater from the Dock Decking
–
Insert Clevis Pin through Hole #4 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle,
attach retaining ring through the hole in the end of the clevis pin.
Dockside Rack
Page 4 of 13
Snap Button
Cam Buckle
Cradle
Handle
Pivot
Lateral
Hole 4
Hole 2
Hole 4
Hole 2
Clevis Pin
Head
Clevis Pin
Head
Circular
Retaining
Ring
Circular
Retaining
Ring
