STEP 1: Attach sliding mount to your dock or other surface:
1. Remove the
Sure-Step decking
from the frame and place to the side.
2. Position the platform frame so the
sliding mount
is facing down
and the
bumper
is facing up (see Figure B).
3. Position the sliding mount in it’s permanent location and
mark the 4 holes on the
mounting bracket
.
4. Pre-drill the holes for your mounting bolts (not included), then
install your mounting bolts, making sure the sliding mount is
securely attached to your mounting surface.
Step 1
Parts Needed
Quantity
Boarding Platform Frame 1
Mounting Hardware
4
(not provided)
Sliding Boarding Step
assembly instructions
Based on the design of this product, it is critical that the structure that it attaches to is substantial enough to
carry the weight of the sliding boarding step and occupant.
Do not mount to rotten wood, crumbling concrete or other insecure surface, the boarding
step could fail resulting in potential bodily injury and/or property damage.
CAUTION
SLIDING
MOUNT
CENTER RAIL
✎
Sure-Step decking
IMPORTANT: You will need 4 anchoring bolts (not included) for attaching the sliding mount.
The length and style of these will vary based on your mounting location.
extend and retract to determine best mounting position
To determine the best mounting location for your sliding boarding step,
we suggest placing the frame with sliding mount attached in it’s approximate
location, then fully extend and fully retract the frame. Make adjustments to
your mounting location based on these two positions (see Figure B).
TIP
MOUNTING
BRACKET
Toll Free: 1-800-870-6756 | [email protected] | www.thedockdoctors.com
3
© 2021 The Dock Doctors - V6-0221
LLC
®
Dock Doctors
The
Waterfront Specialists
B
A
bumper
sliding
mount
mounting
bracket