11
Note: Origin of MOOZ-3 is defaulted at the center of heated bed, please be sure to check the “
Origin at center
” box, otherwise the machine will not work normally.
3.4.3
Printing
Load and profile the model:
options “ ”, “ ” , “ ” and “ ”
① Adjust the model: Left click on the model, four
will appear on the left side of the interface,
you can adjust as needed.
② After setting parameter according to the next
page, click Slice to generate Gcode file.
③ View the details of the slice: Click the
drop-down list on the upper middle corner of the
interface and select “Layer view” to view the
details of the slice.
Slice
PREVIEW
Layer view
Layer view
MOOZ-3
Printer Name:
Add printer
Custom
Settings
Printer
Add Prjnter...
100
mm
100
mm
100
mm
Elliptic
X min
Y min
X max
Y max
Gantry height
Number of Extruders
Shared Heater
End G-code
Printerhead settings
Printer
Printer Settings
X(Width）
Y(Depth）
Z(Height）
Build plate shape
Origin at center
Heated bed
Heated build volume
G-code flavor
Start G-code
Extruder 1
-50 mm
-50 mm
50 mm
50 mm
100 mm
1
M104 S0
M140 S0
G92 E1
G1 E-1 F300
G28
M84
G28
G1 Z15.0
F3000
G92 E0
G1 F200 E3
G92 E0
Printer
0.4
mm
1.75
mm
0 mm
0 mm
0 mm
Nozzle Settings
Nozzle size
Compatible material diameter
Nozzle offset X
Nozzle offset Y
Cooling Fan Number
Extruder Start G-code
Extruder End G-code
Extruder 1
