DoAll 21117, Инструкция и каталог запасных частей

Страница: 28 / 53

Instruction & Parts Manual
Pag.28
Edition A
14.2.4 Blade tension assembly
Blade tension assembly Dwg. 210/16 Pos. Tool
Adjust the guide track Spanner
Check locknut 03-052
Do not regulate the central screw of the blade tension guide
14.2.5 Band drive assembly
Band drive assembly dwg. 210/03 Pos. Tool
Check the electrical motor 03-001
Check the collect locking that connect the wheel to the reducer shaft 03-043
Check belts 03-019
14.2.6 Guide arms
Check guide arms dwg. 210/05 Pos. Tool
Check carbide inserts 05-045
When changing the blade, clean the inserts with gasoline
Check, and if necessary replace, the guiding ball bearings and the guide-arm inserts
05-023
05-026-029
Check and rotate the carbide backer 17-003
14.2.7 Band brush assembly
Band brush assembly dwg. 210/20 Pos. Tool
Check and if necessary replace the band brush 20-014 Spanner
Register the brush so to keep the blade teeth always clean
14.2.8 Wheels
Wheel. 03-042-0 Pos. Tool
Check the wheel adjustment
Check the blade position on the wheel. If the blade back touches the wheel, call the manu-
facturer.
03-042 Manufacturer
Check and keep clean the wheel grooves 03-042
Be sure the blade is not cutting the machine frame 03-042 Manufacturer
Keep lubricated all the bearings 03-051
14.2.9 Servo-cutting device
Servo cutting assembly Dwg. 066/17 Pos. Tool
Check the servo-valve adjusting the cutting pressure. Turn the knob
Open the servo-valve cover and check the vertical movement of the unit.
Spanner