DoAll 21117, Инструкция и каталог запасных частей

Страница: 24 / 53

Instruction & Parts Manual
Pag.24
Edition A
Index backward
Index forward
GO TO function
Head up
Head down
Pressing this key simultaneosly with SHIFT the head descent fast
Shift key
To open the index vise
To close the index vise
The C-260 NC does not allow a manual cut to avoid possible injuries to the operator. When it is necessary to make a single
cut, position the material manually and clamp it with the index vise, then press simultaneously the “SHIFT” and “I” keys.
The machine will close the vises, start the band and begin the cut in semi-automatic cycle.
When the cut will be finished, the machine will automatically shut down.
12.1.6 SAW 3 PLUS soft keys map
Following you can find level and description of each machine soft key icon:
Level 1 Level 2 Level 3 Level 4 Level 5 Description
To access the machine configuration menus
Zero setting of machine axes
Advanced zero setting s
Static zero setting, axis 2
Static zero setting axis 1
Dinamic zero setting axis 1
Static zero setting axis 1 with band kerf compen-
sation
Axis 1 test
Operator customizable parameters
SAW 3 programming section
Machine components definition
Machine components parameters