DO IT+GARDEN 6471.190, Инструкция по эксплуатации

Страница: 13 / 13

GB
Care and maintenance
V_01/06/2010
14
4. Inserting the tree
→
P. 2, item 4
Position the tree centrally, straight and evenly weighted in the Christmas Tree Stand.
5. Closing the Christmas Tree Stand
→
P. 2, item 5
Operate the foot lever until the four-fold clamping mechanism has firmly gripped the tree.
Gently shake the tree to test whether the stand has been closed securely, if necessary repeat
the clamping process.
6. Securing the Christmas Tree Stand
→
P. 2, item 6
When the trunk has been secured, slide the slide of the lever guard mechanism downwards
to the "Closed" Position (marked in red).
Attention: Do not reach into the working area of the clamping mechanism during the clamping
process (risk of pinching and bruising)!
7. Filling the Christmas Tree Stand
→
P. 2, item 7
Fill the Christmas Tree Stand with water: When you reach the red display (max.) on the water
level display, the Christmas Tree Stand is full. Do not continue to fill with water otherwise it
will overflow. The Christmas Tree Stand may only be filled after the tree has been set up.
8. Emptying the Christmas Tree Stand
→
P. 2, item 8
Remove the water level display by pulling it our of the housing. This opening can then be used
to empty the Christmas Tree Stand.
Care and maintenance
– Dry the Christmas Tree Stand after use and lightly grease the metal parts. Store in a dry loca-
tion. Before using again check cables and moving parts for stability, cracks etc.
2. Opening the Christmas Tree Stand
→
P. 2, item 2
To open the Christmas Tree Stand, slide the slide of the lever guard mechanism upwards to
the "Open" position (marked in green).
3. Releasing the clamping mechanism
→
P. 2, item 3
Push the foot lever with the tip of your foot downwards past the pressure point.