DMX4ALL DMX-LED-Dimmer CC1, Руководство пользователя

Страница: 9 / 16

DMX-LED-Dimmer CC1
9
RDM
(up to Hardware V1.3 with Firmware V1.3 or higher)
RDM is the shortcut for
R emote D evice M anagement.
As soon as the device is in the system, device-dependent settings can be made
remotely via RDM command due to the uniquely assigned UID. A direct access to the
device is not necessary.
If the DMX start address is set via RDM, all address switches at the DMX-LED-
Dimmer CC1 must be set to OFF ! A DMX start address set via the address
switches always has priority !
This device supports the follwoing RDM commands:
Parameter ID Discovery
Command SET
Command GET
Command ANSI/
PID
DISC_UNIQUE_BRANCH

E1.20
DISC_MUTE

E1.20
DISC_UN_MUTE

E1.20
DEVICE_INFO

E1.20
SUPPORTED_PARAMETERS

E1.20
PARAMETER_DESCRIPTION

E1.20
SOFTWARE_VERSION_LABEL

E1.20
DMX_START_ADDRESS
 
E1.20
DEVICE_LABEL
 
E1.20
MANUFACTURER_LABEL

E1.20
DEVICE_MODEL_DESCRIPTION

E1.20
IDENTIFY_DEVICE
 
E1.20
FACTORY_DEFAULTS
 
E1.20
DMX_PERSONALITY
 
E1.20
DMX_PERSONALITY_DESCRIPTION

E1.20
DMX_FAIL_MODE
 
E1.37
SERIAL_NUMBER
1)

PID:
0xD400
1) Manufacturer depending RDM control command (MSC - Manufacturer Specific Type)