NOMENCLATURE
This document uses these indicators:
DANGER ! May cause harm to user and/or equipment
INFO: How to setup your device
INFO: Status Information
CONNECTORS
The booster/splitter is using cage clamp terminals for both, input and output. This type of connector is very
reliable, ruggedized and easy to use. To open, press lever, insert cable and release.
Contact assignment:
The DMX data outputs are optically isolated, and are GND- and potential-free referenced to the DMX signal
input.
DMX INPUT
Signal input for control signals according to USITT DMX512/1990 or DIN 56930-2
Pin 1
grey
screen / GND
Pin 2
blue DMX - (inverted)
Pin 3
red
DMX + (normal)
DMX THRU
unbuffered or active bufferd output (depending on jumper setting)
Pin 1
grey
screen / GND
Pin 2
blue DMX - (inverted)
Pin 3
red
DMX + (normal)
DMX OUTPUTS
4/5/8 individual outputs, galvanically isolated to DMX512 signal input
Pin 1
grey
screen / GND
Pin 2
blue DMX - (inverted)
Pin 3
red
DMX + (normal)
Model 3404C-FG:
4 DMX RDM OUTPUTS
Model 3405A-FG:
1 DMX OUTPUT (NON-RDM, OUT1)
4 DMX RDM OUTPUTS (OUT2...5)
Model 3408A-FG:
8 DMX RDM OUTPUTS
POWER SUPPLY
230V AC 50Hz approx. 4W
Pin 1
blue
Neutral
Pin 2
black Live 230V AC
Pin 3
greeenPE (Protective Earth)
POWER SUPPLY
The power supply is 230V AC 50 Hz. Mains voltage can be dangerous to your health; connec-
tions must be carried out by a qualified technician only. Make sure the unit has been disconnec-
ted from mains before making any other connections to the booster/splitter. Verify before re-ap-
plying power. Make sure the PE terminal is connected.
