Thank you for choosing a SOUNDLIGHT device.
The SOUNDLIGHT DMX Splitter/Booster 3404C-H is a highly sophisticated device, which was designed to
buffer and distribute DMX light control signals complying with USITT DMX-512/1990 or DIN 56930/2, ANSI
E1-11 DMX512-Aand ANSI E1-20 dMX RDM, respectively. The unit can be used with all standard light con-
trol systems.
Its special advantages include:
-
universal protocol decoding
Recognizes all variants of the protocol as defined by USITT/ESTA/DIN and displays the number of DMX
channels received;
-
future-proof
The unit is software controlled an can be adapted to any change in protocol definition;
-
unlimited channel count
The number of DMX channels sent or received does not affect the operation of the DMX splitter/booster
3404C-H, since the unit can handle all transmission lengths.
-
other protocols available
Besides DMX512, the unit can handle all RS-485 based transmission protocols, such as AVAB,
MARTIN, HIGH END SYSTEMS et al.
When using other protocols then DMX512, the channel display, however, will not work.
-
cost-effective
The SOUNDLIGHT 3404C-FG / 3405A-FG / 3408A-FG is a cost-effective solution for many purposes.
VERSIONS
The booster / splitter models are available as:
DIN RAIL MODELS:
3404A-H
DIN rail mount unit,1x DMX IN, 1x DMX THRU, 4x DMXOUT (common isolation)
3404B-H
DIN rail mount unit,1x DMX IN, 1x DMX THRU, 4x DMXOUT (individually buffered/isolated)
3404C-H
DIN rail mount unit,1x DMX IN, 1x DMX THRU, 4x DMXOUT (individually buffered/isolated)
DMX RDM compatible
3404LC-H
DIN rail mount unit 5U,1x DMX IN, 1x DMX THRU, 4x DMXOUT (common isolation)
DMX RDM compatible
3406LC-H
DIN rail mount unit 6.5U,1x DMX IN, 1x DMX THRU, 6x DMXOUT (common isolation)
DMX RDM compatible
3408LC-H
DIN rail mount unit 6.5U,1x DMX IN, 1x DMX THRU, 8x DMXOUT (common isolation)
DMX RDM compatible
PCB and Stand Alone Models:
3401A-EP
printed circuit board, 1x DMX IN, 1x DMX OUT, opto-isolated line booster
3401B-H
DIN rail mount RDM compatible Line Booster, opto-isolated
3402A-EP
printed circuit board 1x DMX IN, 2x DMX OUT opto-isolated in/out
3402A-EPD
printed circuit board 1x DMX IN, 2x DMX OUT opto-isolated in/out, with Display
3402A-FG
stand alone unit 1x DMX IN, 2x DMX OUT opto-isolated
3402A-FGD
stand alone unit 1x DMX IN, 2x DMX OUT opto-isolated, with Display
19“ rack mount units:
3405A-FG
19" rack mount unit 1x DMX RDM IN, 1x DMX THRU, 1x DMX OUT, 4x DMX RDM OUT,
opto-isolated, with Display
3408A-FG
19" rack mount unit 1x DMX RDM IN, 1x DMX THRU, 8x DMX RDM OUT,
opto-isolated, with Display
3410A-FG
19" rack mount unit 1x DMX IN, 1x DMX THRU, 10x DMX OUT opto-isolated, with Display
