DMX ProFusion M5, Руководство пользователя

Страница: 21 / 32

17
Viewing the Network settings
The View Settings option displays the current network configuration for the ProFusion M5. This includes the IP
type (DHCP or static), IP address, subnet ask, default gateway, and the IP address of the FTP server the ProFu-
sion M5 will connect to for updates.
Viewing the Network Settings from the Title/Artist screen:
sTeP 1 Press the ENTER button to access the Control Panel menu system.
sTeP 2 Press the DOWN button until
Network Control is highlighted, then press the ENTER button.
sTeP 3 Press the DOWN button until View Settings is highlighted, then press the ENTER button.
sTeP 4 Press the UP or DOWN buttons to scroll through the settings.
Modifying the network settings incorrectly will likely render the ProFusion M5 unable to connect for updates.
Proceed only at the direction of your network administrator or dMX.
Modifying the iP Type
The Set IP Type option allows you to change between DHCP and static IP addressing, as well as set the IP ad-
dress, subnet mask, default gateway, and DNS addresses for static IP addressing.
When changing the IP type from DHCP to static, it will be necessary to enter the IP address, Subnet Mask, and
Gateway. Please have your network settings available before changing from DHCP to static.
Note: IP addresses such as 10.1.1.100 should be entered as 010.001.001.100 and Subnet Masks such as
255.255.255.0 should be entered as 255.255.255.000.
Changing the IP type from the Title/Artist screen:
sTeP 1 Press the ENTER button to access the Control Panel menu system.
sTeP 2 Press the DOWN button until
Network Control is highlighted, then press the ENTER button.
sTeP 3 Press the DOWN button until Set Configuration is highlighted, then press the ENTER button.
sTeP 4 Press the DOWN button until
Set IP Type is highlighted, then press the ENTER button.
sTeP 5 Press the DOWN button until STATIC is highlighted, then press the ENTER button.
sTeP 6 Press the UP or DOWN buttons to set the value for the first digit of the first octet (group of numbers),
then press the RIGHT button to move to the second digit.
sTeP 7 Press the UP or DOWN buttons to set the value for the second digit of the first octet, then press the
RIGHT button to move to the third digit.
sTeP 8 Press the UP or DOWN buttons to set the value for the third digit of the first octet, then press the
RIGHT button to move to the first digit of the second octet.
sTeP 9 Repeat steps 6 – 8 to set the remaining octets, then press the ENTER button to set the subnet mask.
sTeP 10 Repeat steps 6 – 9 to set the subnet mask, then press the ENTER button to accept the change.
sTeP 11 Proceed to the section,
Changing the Default Gateway , on the next page, to set the gateway.