DMX ProFusion DS, Руководство пользователя

Страница: 12 / 20

P r o F u s i o n D u s e r G u i D e
6
Operation
Powering On and Off ProFusion DS
Powering On ProFusion DS
STeP 1 Press the POWER button once.
STeP 2 The green LED power indicator, below the POWER button, will illuminate and ProFusion DS will
produce an “all’s well” beep.
Note: If your ProFusion DS produces a series of four beeps when powered on, see “Appendix B:
ProFusion DS Beep Codes” (see p. 9).
Powering Off ProFusion DS
STeP 1 Press the POWER button once.
STeP 2 ProFusion DS will beep once and the music will fade out immediately.
Loading ProFusion DS Discs
STeP 1 Anytime after your ProFusion DS has produced the “all’s well” beep, press the DVD-ROM eject button.
STeP 2 Place a valid ProFusion D/DS disc (label side up) into the tray.
Note: Only DMX ProFusion D/DS discs will play in this device. Consumer audio CDs and DVDs will
not function with ProFusion DS. Inserting a disc other than a valid ProFusion D/DS disc will cause
the DVD-ROM drive to eject its tray.
STeP 3 Press the DVD-ROM eject button to close the tray.
Note: Always use the DVD-ROM eject button to open and close the DVD-ROM tray.
STeP 4 Once the tray has close, you will hear the DVD-ROM drive begin to spin and the green LED on the front
of the DVD-ROM drive will begin to flash. Playback will begin approximately 35 seconds after
the tray has closed.
Changing ProFusion DS Discs
STeP 1 To change ProFusion DS discs, press the DVD-ROM eject button to open the DVD-ROM tray.
Note: Do not open the DVD-ROM tray if the activity light on the front of the DVD-ROM drive is flash-
ing.
STeP 2 Remove the disc currently in the tray and replace it with your desired disc.
STeP 3 Press the DVD-ROM eject button to close the tray. The new disc will begin to play within 35 seconds of
the tray closing.
Note: If your disc contains messaging for your MOH zone, the message will continue to play until a
disc is inserted that contains a different message.