DMT 100801, Руководство пользователя

Страница: 20 / 27

18
host’s control panel. Press the corresponding software button (for the infrared function to study), The
setup program will start a window for the button you pressed. See figure 23.
Fig.23
Now, press the corresponding button on the projector’s remote control. After successful sampling of the
infrared code, a pop up window shall appear asking you to confirm. Therefore, please check the
projectors action. If ok, then confirm. If not ok, press “No” and start all over again.
Fig. 24
Possible causes for problems during infrared learning mode
Check the connections of the learning cable.
Check if the infrared LED is correctly placed next to the infrared receiving window of the
projector.
Incorrect sampling of infrared code. Try again and check the projector’s action.
Let the host learn each function in sequence.