DMT 100801, Руководство пользователя

Страница: 10 / 27

8
25) Aux 2 video input.
Connect with Video Out terminal of a video device.
26) Projector video output.
This output will contain the video program signal.
27) Monitor video output.
This output will continuously show the DVD output. This way the operator has a preview facility to find
the desired program material on the DVD player.
28) DVD audio input.
Connect with the Audio Out terminal of a DVD device.
29) VCR audio input.
Use the supplied adapter only.
30) Aux 2 audio input.
Connect with the audio output of a line level audio device.
31) Computer audio input.
Connect with the audio output of a PC/ laptop.
32) Laptop audio input.
Connect with the audio output of a PC/ laptop.
33) Aux 1 audio input.
Connect with the audio output of a line level audio device.
34) Master audio output.
Connect with your mixer or amplifier.
35) Mic audio input.
Jack input. Level can be adjusted by using the MIC Volume Control buttons (11).
36) Detection terminal.
Use this input to connect door switch detectors.
37) IR LED terminal.
Use to connect an Infrared LED for remote purposes.
38) Control panel
9-pole Sub D connector for connecting the control panel.
39) Light control
Control Voltage output for remote light control (0-10V).
40) Switched power sockets
Used for remote controlling of external devices.
41) IEC inlet
42) Computer VGA input.
Connect to the VGA output of a PC/ laptop. Because this input takes the computer’s VGA signal,
The computer’s monitor should be connected to the monitor VGA output (45) .
43) Computer Laptop VGA input.
Connect to the VGA output of a PC/ laptop.
44) Aux 1 VGA input.
Connect to the VGA output of a PC, laptop or other VGA compatible device.
45) Monitor VGA Output.
Connect with the VGA in terminal of a monitor. This output will continuously show the computer’s VGA
signal.
46) Projector VGA Output.
Connect with the VGA in terminal of a projector. This output will contain the VGA program signal.
47) Projector RS232 terminal.
Connect with the RS232 terminal of a projector.
48) Computer serial port.
Connect with the RS232 port of your PC/ laptop to program the Presenter Control.