SecuraHub Installation and Programming Guide
Digital Monitoring Products
11
FAST PROGRAMMING
Fast Programming
17.1
Fast Program
The
Fast Program
section allows you to quickly configure the
essential settings
for the
SecuraHub™ panel. When the panel programming defaults are acceptable
for installation and only basic programming options are needed, FAST PROGRAM
allows the installer to quickly enter information without navigating all of the
programming menus. After choosing FAST PROGRAM, continue through the basic list
of options.
17.2
Account Number
Enter the account num ber sent to the receiver. The range of account
numbers are 1 to 65535. For account numbers of four digits or less, you
do not have to enter leading zeros. The panel automatically right justifies
the account number.
17.3
First IP Address
Enter the first (primary) IP address and press CMD. The panel displays WPS? NO
YES. Press the fourth select area to choose YES. Press the WPS button on the
router. WIFI SETUP SEARCHING displays until connected to the IP address. Advance
to APP Key.
17.4
App Key
Enter the 8-digit App Key obtained in your Dealer Settings tab at
DMPDealerAdmin.com.
17.5 System
This configures the panel as either an All/Perimeter system (Perimeter/Interior) or
a Home/Sleep/Away system (Perimeter, Interior, and Bedrooms).
17.6
Hours from GMT
Enter the number (0-23) that indicates the Greenwich Time zone (GMT) where the
panel is located.
17.7
Weather Zip Code
Enter the zip code of the panel at this option.
17.8
Enter Siren Serial Number
Enter the eight-digit serial number for the wireless siren. The siren is automatically
set to Output 61.
17.9
Zone Number
Enter the zone number to program.
17.10
Zone Name
Press any select area to display the default zone name. To change the default zone
name, press any select area to clear name. Enter up to 16 characters for the new
zone name.
17.11
Zone Type
To change the default zone type press any select area.
17.12
Area Assignment
To change the default area, press any select area.
17.13
Serial Number Entry
E
nter the eight digit serial number, including leading zeros, found on the
wireless device.
17.14 Stop
When all zones are programmed, press the Back Arrow key to display FAST
PROGRAM. Press CMD to display STOP and press any select area to exit the Fast
Program function and save the programming.
Note:
All programming options are still available by reentering the
programming menu.
Note:
For Full Programming options, use the full programming feature on the Tech App™ or log into the Dealer Admin
Site at DMPDealerAdmin.com.
FAST PROGRAM
ACCOUNT NO:
FIRST IP ADDR
0.0.0.0
SEARCHING
APP KEY:
SYSTEM:
ALL/PERIM
AREA
A/P
H/A
HRS FROM GMT:
6
ENTER WEATHER
ZIP CODE:
0
ENTER SIREN
SERIAL#:-
ZONE NO: -
* DEFAULT NAME *
ZONE TYPE: -
AREA: -
SERIAL #: -
STOP
