DMP Electronics SCS-1R Скачать руководство пользователя страница 27

Страница: 27 / 40

Digital Monitoring Products

SCS-1R Installation Guide

OperatOr’s Guide

Off-Normal Settings

This section of programming allows you to view previous Fire, Fire Verify, Burglary, and Supervisory zones that

have not restored. In addition, supervised network (NET) accounts that are off line display here.

SCS-1R MENU

OFF-NORMAL?

Off-Normal

Press any top row Select key to view the messages. Press the COMMAND key to advance

to the next programming section. Press the Back Arrow key to return to Configure

System.

OFF-NORMAL

ACCTS

zONES

Off-Normal Accounts and Zones

Press the far left Select key to view non-check-in accounts. Press the far right Select

key to view zones.

112345 NET ACCT

NOT RESPONDING

Off-Normal Account Display Example

After pressing the Select key under ACCTS, all off normal account instances display

a message similar to the one shown on the left. The line number is listed first: line 1

in the example. The account number follows the line number: 12345. The example

message then displays: Network Account not Responding.

112345 NET ACCT

DELETE?

yES

Delete Off-Normal Account Instance

When an off-normal account message displays, pressing any top row Select key can

delete this instance from the SCS-1R. Press the top row Select key under YES to delete,

or NO to save the message and return to the last display. Default is NO.

112345 zONE 123

FIRE ALARM

Off-Normal Zone Display Example

After pressing the top row Select key under ZONES, all off normal zone messages

display similar to the one shown on the left. The line number is listed first: line 1 in

the example. The account number follows the line number: 12345. The zone number

then displays: ZONE 123. The second line displays the zone type, Fire, Burglary, or

Supervisory, followed by the event type, Alarm or Trouble: FIRE ALARM is the message

in the example.

112345 zONE 123

DELETE?

yES

Delete Off-Normal Zone Instance

When an off-normal zone displays, pressing any top row Select key can delete this

account instance from the SCS-1R. Press the top row Select key under YES to delete, or

NO to save the message and return to the previous display. Default is NO.

System Status

The programming System Status section allows you to view various items, such as the number of calls each line

has received since midnight.

SCS-1R MENU

SySTEM STATUS?

System Status

Press any top row Select key to view System Status. Press the COMMAND key to advance

to the next programming section. Press the Back Arrow key to return to the Off-Normal

programming section.

LINE X

NO OF CALLS: XXXX

Number of Calls

This displays the number of calls the line has received since midnight. Lines 1 through

5 display if they are DD lines. XXXX in the second line of the display represents the

number of calls.

NO OF AUTOMATION

MESSAGES: XXXX

Automation Messages

This displays the total number of messages sent to the automation computer since

midnight.

Содержание SCS-1R









































Результаты поиска

Содержание SCS-1R

Отзывы:

Похожие инструкции для SCS-1R

Бренды по названию

Популярные бренды

DMP Electronics SCS-1R, Руководство по установке

Результаты поиска

Содержание SCS-1R

Отзывы:

Похожие инструкции для SCS-1R

Бренды по названию

Популярные бренды