DMP Electronics CellCom LTE Series, Руководство по программированию и установке

Страница: 29 / 41

CellCom‑LTE Programming and Installation Guide Digital Monitoring Products
25
AREA INFORMATION
This option allows you to assign functions to the area of the communicator. All non‑24‑hour
zones must be assigned to an active area. See Zone Information for more information.
AREA NUMBER
Enter the number of the area you wish to program. Select from areas 1‑6.
AREA NAME
Only those areas given names can have zones assigned to them. All others are marked
*
UNUSED
*. See Letters and Special Characters for more information.
To add an area name to the system, press any select area and enter up to 16 characters for
the new name. Press
CMD
to continue. To mark an active area as unused, delete the old
name by pressing any select key then press
CMD
. The communicator automatically sets
the name as *
UNUSED
*. If you have already initialized the communicator, all areas will be
marked as *
UNUSED
*.
AUTOMATIC ARMING
Choose
YES
to allow this area to arm automatically according to the opening and closing
schedule. At arming, faulted zones are handled according to the option selected in bad
zones. If a closing report is sent, the user number is indicated as
SCH
on the SCS‑1R or
SCS‑VR receivers.
Choose
NO
to disable automatic arming for this area. The default is
NO
.
Bad Zones
At the time of automatic arming, some zones in the area may not be in a normal condition.
This option allows you to program the panel’s response to these bad zones. This option is
not displayed if
AUTO ARM
is
NO
.
BYP
: All bad zones are bypassed. A report of the bypass is sent to the receiver if bypass
reports has been set as
YES
. The report indicates
SCH
as the user number.
FORC
: All bad zones are force armed. Zones force armed in a bad condition are capable of
restoring into the system and reporting alarms if tripped. A report of the force arm is sent
to the receiver. The report indicates the user number as
SCH
.
REF
: The automatic arming is refused and no arming takes place. Closing report is sent to
the receiver.
AUTOMATIC DISARMING
Choose
NO
to disable automatic disarming by schedule for this area. The default is
NO
.
Choose
YES
to allow this area to automatically disarm according to a schedule. If an
opening report is sent to the receiver, the user number is indicated as
SCH
.
AREA INFORMATION
AREA NO: ‑
* UNUSED *
AUTO ARM NO YES
BAD ZONES: BYP
BYP FORC REF
AUTO DIS NO YES