DMP Electronics 9000 Series Скачать руководство пользователя

Страница: 43 / 48

Digital Monitoring Products, Inc | 9000 Series Installation and Programming Guide

INDUSTRY CANADA INFORMATION

This device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the

following two conditions:

This device may not cause interference, and

This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts

de licence. L’exploitation est autorisée aux deux conditions suivantes:

l’appareil ne doit pas produire de brouillage, et

l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d’en compromettre le fonctionnement.

This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits

specified by Health Canada Safety Code 6. The system must be installed at a minimum separation

distance from the antenna to a general bystander of 7.87 inches (20 cm) to maintain compliance with

the General Population limits.

L’exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée

conforme aux limites établies par le Code de sécurité 6 de Santé Canada. Le système doit être installé

à une distance minimale de 7.87 pouces (20 cm) séparant l’antenne d’une personne présente en

conformité avec les limites permises d’exposition du grand public.

Содержание 9000 Series

















































Результаты поиска

Содержание 9000 Series

Отзывы:

Похожие инструкции для 9000 Series

Бренды по названию

Популярные бренды

DMP Electronics 9000 Series, Инструкция по установке и программированию

Результаты поиска

Содержание 9000 Series

Отзывы:

Похожие инструкции для 9000 Series

Бренды по названию

Популярные бренды