DMP Electronics 9000 Series, Инструкция по установке и программированию

Страница: 16 / 48

9000 Series Installation and Programming Guide | Digital Monitoring Products, Inc. 12
PROGRAM THE KEYPAD OPTIONS
Keypad Options and Keypad Diagnostic menus allow install and service technicians to
configure and test keypad operation. To access the installer options:
Hold down the back arrow and
CMD keys for two seconds. Enter 3577 (INST) and press
CMD .
The display changes to KPD OPT (keypad options), KPD DIAG (keypad diagnostics),
KPD RF
(wireless survey), and
STOP
.
The Keypad Options menu allows you to set the default keypad message, enable 2-button
Panic keys, and additional options.
The keypad must be operating anywhere in the Installer Options menu,
3577
(INST), to
be automatically associated by the control panel receiver. To place the keypad into the
association operation, first remove the power connector from the back of the keypad.
Then reapply power and access the Installer Options menu. See “Keypad Wireless Survey”
for more information.
Keypad Options
Keypad Options
To program keypad options, press KPD OPT .
Serial Number
The keypad displays the serial number of the keypad.
KPD KPD KPD
OPT DIAG RF STOP
SERIAL #:XXXXXXXX