HDE51C-DS
©2022 DANIELS MANUFACTURING CORP., ALL RIGHTS RESERVED
Page 8 of 8
REV. A
7/26/2022
Daniels Manufacturing Corporation
526 Thorpe Road, Orlando, FL 32824 USA
Phone: 407-855-6161 Fax: 407-855-6884 Email: [email protected]
HDE51C
BATTERY POWERED CRIMP TOOL
DATASHEET
Error Codes
1.
Overcurrent Fuse
2.
Overcurrent Comparator
3.
Overheat Board
4.
Overheat Battery
5.
Battery Empty, Operation Stop
6.
Faulty Crimp with Motor in Operation
7.
Faulty Crimp without Motor in Operation
8.
Low Battery
9.
Battery Empty
10.
Battery Low
11.
Tool Deactivated
12.
Service Necessary
13.
RTC not Found
14.
BT Unit not Found
15.
Pressure Sensor not Found
16.
Burst Pressure Exceeded
17.
Battery Temperature Too Low
DMC offers complete refurbishing and recalibration services.
DMC specially engineers and manufactures complete tool
kits to satisfy individual customer requirements, such as total
aircraft support general shop maintenance or production, on
board ship and vehicle service, etc.
Limitation of Liability
DANIELS MANUFACTURING CORPORATION IS NOT LIABLE
FOR CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY
NATURE OR KIND RESULTING FROM THE USE, OR MISUSE,
OF ANY OF ITS PRODUCTS. OWNERS AND USERS OF DMC
PRODUCTS ASSUME FULL RESPONSIBILTY FOR
INSTRUCTING THEIR EMPLOYEES IN THE PROPER AND
SAFE USE OF SUCH PRODUCTS.
Limited Warranty
DMC (Daniels Manufacturing Corporation) warrants each
new product sold by it to be free from defects in material
and workmanship under normal use and service. DMC’s
obligation under this warranty is limited to the free
correction or, at DMC’s option, the refund of the purchase
price of any such product which proves defective in normal
service within ninety (90) days after delivery to the first
user, provided that the product is returned to DMC with all
transportation charges prepaid and which shall appear to
DMC’s satisfaction, after DMC’s inspection, to have been
defective in material and workmanship, it being understood
that DMC products are not consumer products. This
warranty shall not cover any damage to any product which,
in the opinion of DMC, was caused by normal wear, misuse,
improper operation, tampering, neglect or accident. This
warranty is in lieu of all other warranties express or implied.
No warranty, express or implied, is made or authorized to be
made or assumed with respect to products of Daniels
Manufacturing Corporation other than those herein set forth.