HDE51C-DS
©2022 DANIELS MANUFACTURING CORP., ALL RIGHTS RESERVED
Page 6 of 8
REV. A
7/26/2022
Daniels Manufacturing Corporation
526 Thorpe Road, Orlando, FL 32824 USA
Phone: 407-855-6161 Fax: 407-855-6884 Email: [email protected]
HDE51C
BATTERY POWERED CRIMP TOOL
DATASHEET
Charging a Battery
When a battery is inserted on to the charger the red LED will
illuminate and stay on while charging occurs.
The green LED will turn off while the battery is less than
80% charged.
Both green and red LED’s will illuminate when the battery is
greater than 80% charged, but not yet fully charged.
When charging is complete, the red LED will turn off, and
the green LED will stay on.
If you leave the battery on the charger after it is charged,
the charger will switch to its trickle charge mode for 24
hours.
The following are the possible conditions shown by
the right hand yellow LED.
Flashing indicates trouble with the cooling fan system.
Ensure that all cooling vents, and the battery connections
are free of dust or debris. If flashing continues, return the
unit to DMC for repair.
Continuous illumination indicates that a conditioning charge
is occurring. This happens when the battery being charged
is at either a very low or very high temperature. This can
also occur if you attempt to charge a fully charged battery.
These conditions will increase charging times.
Other conditions indicated by charger LED’s
Flashing Red with Green off-Charger is overheated.
Unplug the charger, and allow it to cool down.
Flashing Red, with Flashing Green-This indicates a
defective battery.
Spare Battery Parts
120 VAC Battery Charger
HDE-LI-120C
230 VAC Battery Charger
HDE-LI-230C
18V Replacement Battery HDE-LI-B
120 VAC Power Adapter
HDE-120AC-A
230 VAC Power Adapter
HDE-230AC-A
BLUETOOTH CONNECTIVITY
This tool features Bluetooth connectivity for tool monitoring via
Klauke i-press
®
software or the Klauke i-press app.
I-press
®
software features include:
•
Exporting all tool data to check the tool status.
•
Providing with proof of quality in the form of a project record.
•
Free downloading
I-press® app:
•
Made easy - Your Next Generation tool connects to the i-
press® app via Bluetooth - you can now use the
comprehensive range of functions.
•
Everything under control - You can, for example, display
the last service date, the last five pressure values, the
device temperature or the number of crimps you can still
make with the connected tool.
•
Record, verify and archive - Once the project is complete,
you will receive an overview containing all information and
pressure values as an attachment. Very clearly arranged and
revamped as a PDF for printing and submitting.
The software can be downloaded at:
https://www.klauke.com/de/en/ipress-connectivity-software