DLP 100 HPRA-E-410, Руководство пользователя

Страница: 9 / 17

Beginning of season:
> Make sure that the electrical breaker for the pool heat pump is in the OFF position.
> Ensure the water lines and the heat pump are reconnected and/or drain valves are closed.
> Clean the pool filter and make sure the water is flowing adequately through the pool return line (5.1 m
3
/h to 15 m
3
/h).
> Complete your normal preparation and/or cleaning of the pool for the start of the season.
> Switch ON the breaker for the electrical supply to the heat pump.
> Then you need only start the unit and adjust the temperature to the desired value.
End of season (Winterizing)
> Switch OFF the breaker for the electrical supply to the heat pump.
> You must empty the unit of all water. Simply disconnect the WATER INLET and WATER OUTLET lines by unscrewing the
two union fittings on the front of the unit. To completely remove the water from the heat exchanger, you must remove the
drain cap (
WINTERIZING DRAIN ) that is located on the side of the unit. You must then let the water flow out until the unit is
completely emptied. (See the illustration below.)
It is recommended to cover the heat pump with a protective cover that is available from your dealer.
//,0)%304-00$8
FFB0B00FB00FB
A: WATER INLET
B: WATER OUTLET
C: CONDENSATION WATER DRAIN PIPE
D: WINTERIZING DRAIN (with plastic caps)
A
B
D
C
C/-&%0()0'%,/10),7'31+'%00%1%00+2'+.%20$77
EBBB0EF0EFBF0EF0B0CCB0EF0DB
48
47
46 50
51
52
53
54
57
9
6
10
2
11
12
14
33
22
21
23
24
58
25
26
32
30
29
28
15
16
27
8
1
34
35
5
7
31
20
19
18
17
4
13
3
50HPRA-E-410
3P
H
V
entilador
V
entilador
Pr
otección
de fase Pr
otector
de pr
esión alta
Pr
otector
de pr
esión baja
Pr
otector de
pr
esión de agua
Sensor ambiental Sensor de temperatura del agua Sensor de descongelamiento
Compressor
Transformador
Relé
Válvula de
inversión
Pr
otector
de fase
Calentador
del Cárter
Relé
Relé
380 415 V
oltios 50 Her
cios 3PH