- 8 -
OLED
Module
QWM93BA
Normal Time Display
1. In normal time display, the display is off.
2. When the display is off, press D to show time/date. Time and date will be displayed in vertical or horizontal format.
3. Press D again to change mode. Mode sequence is current time/date display format, toggle time/date display format, calendar browse.
NoTe: In any setting or display mode, if no pushers are operated for 6 seconds, any changes will be saved and setting mode
will automatically return to display mode.
Time/calendar Setting
1. In any mode (or when display is off), press and hold C for 2 seconds to enter setting mode; hour will begin flashing.
2. Press A to decrease digit; press B to increase digit. Press and hold either A or B for fast advance.
3. Press C to set and advance to next setting value.
4. Setting sequence is: hour, minute, month, day, year.
5. After year has been selected, press C to exit setting mode.
calendar Browsing Mode
1. Press D to change to calendar mode. Current date will be highlighted on display.
2. Press A to decrease month; press B to increase month. Press and hold either A or B for fast advance.
Touch Sensor Pushers
For the touch screen pushers to be activated, the watch case must be in contact with wearer’s
skin or fingers. The touch screen does not work in water; it is meant for dry conditions only. Keep
the pushers and caseback clean for optimum performance.
Normal Time Display
1. Press A to change mode. Mode sequence is normal time display, chronograph, recall, timer
and alarm.
2. Press B for EL.
3. Press D to toggle time zone 1 (real time) and time zone 2.
NoTe: In any setting mode if no pusher is operated for 3 minutes, all changes will be saved
and the setting will automatically return to normal time display.
NoTe: In Time or Alarm mode, if no pusher is operated for 5 minutes, all pushers (except eL)
will automatically lock. Press and hold B for 3 seconds to unlock pusher operation.
Time and calendar Setting
1. In normal time display, press and hold D to enter setting mode; time zone will begin flashing.
2. Press C to select time zone 1 or time zone 2.
3. Press A to set and advance to seconds.
4. Press C to set seconds to zero.
5. Press A to set and advance to next setting value.
6. Press C to increase digit, press and hold C for fast advance.
7. Setting sequence is: time zone selection, seconds, hour, minute, month, date, year, 12/24-hour
format, hourly chime on/off.
8. Press D to exit setting mode.
NoTe: Weekday is automatically updated upon exiting setting mode.
Alarm Mode
1. Press A to change to alarm mode.
2. Press D to select alarm (4 alarms).
3. Press C to turn alarm on/off.
4. Alarm will sound at preset time for 20 seconds; press any pusher to silence alarm.
Alarm Setting
1. In alarm mode, press D to select alarm (4 alarms).
2. Press and hold D to enter setting mode; hour will begin flashing.
3. Press C to increase hour; press and hold C for fast advance.
4. Press A to set and advance to minute.
5. Press C to increase minute; press and hold C for fast advance.
6. Press D to exit setting mode.
chronograph Mode
1. Press A to change to chronograph mode.
2. Press D to select split or lap time display. If split format is chosen, total accumulated time
will be displayed during counting. If lap format is chosen, individual lap time will be displayed
during counting.
3. Press C to start/stop the chronograph.
4. Press D to reset to zero.
Split/Lap Time
1. Press D while the chronograph is running for split/lap time.
2. Press D again to return to chronograph.
3. Repeat steps 1 & 2 to measure multiple split/lap times. (up to 30)
4. Press C to finalize timing.
5. Press D to reset to zero.
NoTe: Do not reset data to zero if recalling lap records.
Recall Mode
1. Press A to change to recall mode.
2. Press C and D to scroll through lap records.
countdown Timer Mode
1. Press A to change to timer mode.
2. Press C to start/stop the timer.
3. Press D to reset timer to preset time.
4. Alarm will sound for 10 seconds when timer reaches zero. Press any pusher to silence alarm.
Timer Setting
1. In timer mode, press and hold D to enter setting mode; hour will begin flashing.
2. Press C to increase hours; press and hold C for fast advance.
3. Press A to advance to next setting value.
4. Press C to increase digit, press and hold C for fast advance.
5. Setting sequence is hours, minutes, seconds.
6. Press D to exit setting mode.
