- 2 -
2 Eye Day/Date Multifunction
VX36
Date Setting
1. Pull crown out to position 2.
2. Turn clockwise to advance date hand.
3. Push crown back to position 1.
Time and Weekday Setting
1. Pull crown out to position 3.
2. Turn clockwise to advance hour and minute hands.
The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the
desired day.
3. Push crown back to position 1.
Day/Date Watch
VX43
(1 crown)
Date Setting
1. Pull the crown out to position 2.
2. Turn counter-clockwise and set the date for the previous day.
Day Setting
With crown still in position 2, turn clockwise and set the day for the previous day.
Time Setting
1. Pull crown out to setting 3.
2. Turn counter-clockwise to advance the time, and continue until the day/date changes to the present day.
3. Set the correct time.
4. Push crown back to position 1.
DAY HAND
DATE HAND
Big Date Sub-Second
GP10
Time And Date Setting
1. Pull crown out to position 2 and rotate clockwise to set date.
2. Pull crown out to position 3 and rotate to set time.
3. Push crown back to position 1.
NoTe: When the crown is pushed back to position 1, small second hand begins to run.
SMALL SECOND HAND
DATE
Retrograde with Time Sweep
GP00/GP01
Time and Date Setting
1. Pull crown out to position 2 and rotate clockwise to set date.
2. Pull crown out to position 3 and rotate clockwise to set time. Hand in lower window indicates am/pm time and will
automatically reset to “0” at midnight.
3. Push crown back to position 1.
Dual Time Setting
1. Set time zone 1 as indicated above.
2. Pull crown to position 2 and rotate counter-clockwise to set 24-hour hand to second time zone.
3. Push crown back to position 1.
Retrograde with Date Sweep
VD87A
Time and Date Setting
1. Pull crown out to position 3 and rotate clockwise to set day of week. Hand in upper left indicates weekday and will
automatically reset to “M” at the end of the week.
2. Keeping crown in position 3, rotate hands to set the time (make sure am/pm is set correctly)
3. Push crown back to position 1.
4. Pull crown out to position 2 and rotate counter-clockwise to set date.
5. Push crown back to position 1.
Multifunction
TY2866S
Time/Date Setting
1. Pull crown out to position 2.
2. Turn clockwise and set the date for the previous day.
3. Pull crown out to position 3 when second hand is at 12:00 position.
4. Turn crown clockwise until date changes to the present day.
5. Continue turning crown to set the correct time.
6. Return crown to position 1.
NoTe: When setting the hour/minute hands, 24-Hour hand will also advance.
Weekday and Month Setting
1. Press A to set weekday. Each press of pusher A will advance the weekday one increment.
2. Press B to set month. Each press of pusher B will advance the month one increment.
DAY
MONTH
24-HOUR
DATE
DAY
DATE
