DKN technology T 775, Руководство пользователя

Страница: 40 / 44

ERROR POSSIBLE CAUSE INSPECTION PROCEDURE TROUBLESHOOTING
E1 EEPROM Console EEPROM damaged Switch console Replace console
E4 Communication Error Signal transfer error between Check cable connection Replace connecting cables
console and invertor
E5 Incline Error E5 Incline Error 1. Incline motor damaged 1. Check incline motor function 1. Replace incline motor
2. Incline motor cable damaged 2. Check VR cable 2. Replace VR cable
3. Replace invertor
2. Replace invertor
E7 Incline Calibration 1. Incline motor damaged 1. Check incline motor function 1. Replace incline motor
2. Incline motor cable damaged 2. Check VR cable 2. Replace VR cable
3. Replace invertor
2. Commercial currrent too low 1. Install power stabilizer
2. Software communication Error 2. Check motor function
2. Check invertor function
2. Check invertor function
E14 Motor Disconnected Motor cable disconnected 1. Check cables between Replace driving motor
invertor and motor
3. Check motor function
2. Check invertor function
2. Check invertor function
2. Check invertor function
E18/E24 Low-Voltage Unstable voltage input Check power supply Disconnect/reconnect power
cable and restart the machine
after 1 minute
Unstable power grid Check city power
2. Check invertor function
2. Check invertor function 2. Replace invertor
2. Check invertor function
Trouble Shooting