En.8
DK2 Everest R-3 man.
ENGLISH
Pre-Installa
Ɵ
on
The Installa
Ɵ
on should be completed on an asphalt/concrete surface, with su
ĸĐ
ient area to work. Un-
package your new FRISTTRAX Snowplow, discard all shipping materials, recycle if possible. Once the plow is
un-packaged, slowly roll the plow from its upright shipping con
Į
gu
ƌĂƟ
on over onto the built-in cart. Top up
the oil reservoir to
ƚŚĞĮůůů
ine indicated with the 1L of hydraulic oil provided. Your new FIRSTTRAX Snowplow
is now ready to be installed.
Ins
ƚĂůůĂƟ
on
Step 1
– Install moun
Ɵ
ng brackets and cross bar
.
Please follow the instruc
Ɵ
ons included in your mount kit. Fit in place with all fasteners (
Į
nger
Ɵ
ght) then
proceed to
Ɵ
ghten with appropriate tools.
Step 2
– Install the main power cord
.
**ALWAYS EXERCISE CAUTION WHEN USING HAND TOOLS AROUND THE BATTERY! A SOLID
CONDUCTER SUCH AS A METAL WRENCH CAN CAUSE SEVERE INJURY, FIRE, OR EVEN CAUSE THE
BATTERY TO EXPLODE!
A
Ʃ
ach the short lead on the breaker to the posi
Ɵ
ve “+” terminal of the ba
Ʃ
ery. Secure the breaker to the
fender or
Įƌ
ewall with the use of screws or zip
Ɵ
es in a place where it will not come into contact with the
n
ĞŐĂƟǀ
e terminal. A
Ʃ
ach the nega
Ɵ
ve lead to the neg
ĂƟ
ve “-“ba
Ʃ
ery terminal. Route the wires from the
ba
Ʃ
ery in the best possible way to the front of the vehicle avoiding areas that can become hot or cause
fri
ĐƟ
on when the vehicle is in use. Zip
Ɵ
e the wires to the vehicle’s structure so that they do not move or
shi
Ō
when in opera
Ɵ
on. Con
Į
rm the breaker is in the closed posi
Ɵ
on, and then close the hood slowly to
make sure yet again that the wires are clear from pinch points.
INSTALLATION STEPS
