En.10
DK2 Everest R-3 man.
ENGLISH
INSTALLATION STEPS
Step 4
– Connect the main power hand held control
.
Insert the large blue or red plug on the main power cord running from the ba
Ʃ
ery into the ma
Ɵ
ng
plug on the passenger’s side of the li
Ō
link arm. Insert the handheld control plug into the matching
rubber molded receptacle. Route the control wire up over the hood, under the driver’s side
windshield wiper arm, around the driver’s side mirror and in through the window.
IMPORTANT!
Make sure to leave slack in both cables spanning from the vehicle to the snowplow control box.
This allows the cables to free
ŇŽ
at when the snowplow is in use; if they are
ƟŐ
ht they may become
undone or damaged.
Visit the following YouTube links for addi
Ɵ
on hints
h
Ʃ
ps://youtu.be/rt19JmU0r0A
h
Ʃ
ps://youtu.be/-U0VyedQ41Q
