En.4
DK2 Everest R-3 man.
ENGLISH
IMPORTANT SAFE OPERATING PRACTICES
2. Make it a practice to completely lower the blade to the ground every time the
vehicle is parked. A raised blade may drop unexpectedly and this can result in
serious personal injury.
WARNING!
When mounting or removing the Snow Plow, keep hands and feet
clear of the blade, mounting assembly and winch. Moving or falling assemblies
KDYHDSRWHQWLDOWRFDXVHSHUVRQDOLQMXU\1HYHUXVH\RXU¿QJHUWRFKHFN
DOLJQPHQW0RYLQJRUIDOOLQJDVVHPEOLHVFRXOGFUXVK\RXU¿QJHU
CAUTION:
Transport speed should never exceed 70 km/h (45 mph). Adverse
travel conditions may dictate a further speed reduction. Must use appropriate
driving lights
3. Wear a seat belt when plowing snow. Hidden obstacles could make the vehicle
stop suddenly, resulting in personal injury.
4. Put the vehicle in park or into gear and remove the ignition key to prevent
others from starting the vehicle when installing or servicing the plow.
5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewellery or long hair can
EHFDXJKWLQPRYLQJSDUWV)RUZDUPWKZHDUOD\HUVRIFORWKLQJWDNLQJRႇOD\HUV
as you get warmer.
6. Wear safety goggles when working under the hood of the vehicle. for eye
protection from battery acid, gasoline, dirt and dust. Everyday eyeglasses have
only impact resistance lenses. They are not safety glasses.
7. For work connected with the vehicle , avoid touching any hot surfaces such as
the engine, radiator, hoses and exhaust pipes.
8.
$OZD\VKDYHD¿UHH[WLQJXLVKHUUDWHG%&KDQG\IRUÀDPPDEOHOLTXLGDQG
HOHFWULFDO¿UHV
9. Do not plow snow with your head out the window. Sudden stops or protruding
obstacles could result in personal injury.
10. The driver only should be in the vehicle when plowing snow.
SNOW PLOW
1. Maintain the Snow Plow and keep it clean and lubricated. This applies even
ZKHQWKHXQLWLVQRWLQXVHVRDVWRDYRLGFRUURVLRQ,QWKHRႇVHDVRQLQVSHFW
the unit and apply corrosion-resistant paint to any areas that show corrosion to
prevent further damage. If stored outside, cover the winch assembly.
2. Carefully inspect your Snow Plow before every use. Particularly check the
alignment of moving parts and tighten any loose screws and bolts.
3. This unit is not intended for commercial use.
WARNING!
Carefully inspect all Snow Plow components and bolts for
looseness, wear and damage when mounting or removing the unit and before
transporting it.
4. With heavier full-sized vehicles, mainly through momentum, it may be easier to
damage the plow assembly. Cautious use will help extend your years of trouble-
free service.
VEHICLE
5. Do not attempt plowing snow at speeds above 15 km/h
(10 mph). Driving at speeds above 15 km/h (10 mph) with the plow attached
reduces the cool air intake and may cause your vehicle engine to overheat.
6. Do not overload the vehicle. Take into account the loaded vehicle weight,
including the entire Snow Plow assembly, all accessories, driver and passenger,
ÀXLGVDQGFDUJR7KLVZHLJKWLVQRWWRH[FHHGWKHIURQWUHDU*URVV$[OH
WARNING!
When mounting or removing the Snow Plow, keep hands and feet
clear of the blade, mounting assembly and winch. Moving or falling assemblies
KDYHDSRWHQWLDOWRFDXVHSHUVRQDOLQMXU\1HYHUXVH\RXU¿QJHUWRFKHFN
DOLJQPHQW0RYLQJRUIDOOLQJDVVHPEOLHVFRXOGFUXVK\RXU¿QJHU
CAUTION:
Transport speed should never exceed 70 km/h (45 mph). Adverse
travel conditions may dictate a further speed reduction. Must use appropriate
driving lights
WARNING!
Carefully inspect all Snow Plow components and bolts for
looseness, wear and damage when mounting or removing the unit and before
transporting it.
