DK2 Power OPC525, Руководство пользователя

Страница: 17 / 68

v.220704 | 17
STEP 4: FEED CHUTE
1. Install the feed chute on the two hinges. To seat the hinge pins for the first time, use a rubber
mallet to tap the pins into the hinges. These are tight fitting to reduce vibration noise during
operation.
2. Close the chute and latch it.
3. Plug the safety shut-off wire connectors together.
4. You can now use the chute by the handles to tip the unit back so you can perform the next
step and install the hitch.
ENGLISH